Color Stability of Nanoparticles-Modified Dental Resin-Based Composites
Applied Sciences · 18.03.2023 · 13 (6) · 3870
DOI: 10.3390/app13063870 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 18.03.2023. Verfasst von Yousif A. Al-Dulaijan und 5 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
To evaluate the effect of beverages (coffee, tea, Cola-Cola, and mineral water) on the color stability of resin-based composite (RBC) materials modified with different nanoparticles (NPs). The specimens (70/beverage) were fabricated from light-cured RBCs and divided according to NPs into four groups: one control, unmodified (N0); and three experimental—ZrO2 (Zr), TiO2 (Ti), and SiO2 (Si) groups. Each experimental group was further subdivided into two subgroups according to NP concentrations: 3 wt.% and 7 wt.% (n = 10). A spectrophotometer was used to assess the color change (∆E) before and after six months of immersion. Data were analyzed and compared using one-way-ANOVA followed by Bonferroni’s post-hoc test (α = 0.05) and subsequently ∆E value conversion to National Bureau of Standards (NBS) units. The modified light-cured RBCs with ZrO2, TiO2, and SiO2 demonstrated smaller color changes after immersion in the beverages than the unmodified group (p < 0.001). Zr groups showed the lowest ΔE, followed by Ti and Si groups; a 3% concentration resulted in a lower mean ΔE than the 7% concentration. NBS findings showed that coffee and tea produced marked unacceptable color changes (NBS units were >3), and Coca-Cola resulted in noticeable color changes (NBS units between 1.5 and 3), while water produced slight color changes (NBS ≤ 1). Modification of RBCs with both concentrations of ZrO2, as well as 3% of TiO2 and SiO2, may improve its color stability. Based on NBS results, RBCs immersed in mineral water and Coca-Cola showed clinically acceptable color changes, while those immersed in coffee and tea were clinically unacceptable.
Zitieren
APA
Al-Dulaijan, Y. A., AlGhamdi, M. A., Azmy, E., Al-Kholy, M. R. Z., Almulhim, K. S., & Helal, M. A. (2023). Color Stability of Nanoparticles-Modified Dental Resin-Based Composites. Applied Sciences, 13(6), 3870. https://doi.org/10.3390/app13063870
Vancouver
Al-Dulaijan YA, AlGhamdi MA, Azmy E, Al-Kholy MRZ, Almulhim KS, Helal MA. Color Stability of Nanoparticles-Modified Dental Resin-Based Composites. Applied Sciences. 2023;13(6):3870. doi:10.3390/app13063870
BibTeX
@article{AlDulaijan2023,
author = {Al-Dulaijan, Yousif A. and AlGhamdi, Maram A. and Azmy, Emad and Al-Kholy, Mohamed Reda Zaki and Almulhim, Khalid S. and Helal, Mohamed A.},
title = {Color Stability of Nanoparticles-Modified Dental Resin-Based Composites},
journal = {Applied Sciences},
year = {2023},
volume = {13},
number = {6},
pages = {3870},
doi = {10.3390/app13063870}
}
EUVIMED