Resolving the Effect of Laser Beam Welding on the Corrosion Properties of 316L Stainless Steel
Journal of The Electrochemical Society · 26.06.2026 · 173 (12) · 121503
DOI: 10.1149/1945-7111/ae79e3 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 22.06.2026. Verfasst von Oliver Thimm und 3 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben.
Abstract (Originalsprache)
Laser beam welding (LBW) is a widely applied technology for mass manufacturing of 316L stainless steel (SS) bipolar plates employed in proton exchange membrane fuel cells (PEMFCs) application. In this study, a systematic investigation of physical-chemical and electrochemical properties of 316L SS modified by LBW is presented, in relationship to the corrosion properties. At the weld seam, the segregation of Mn and Si is revealed together with MnO and Fe silicates incorporated into a thickened oxide film. Electrochemical characterization in 0.5 M K 2 SO 4 (pH 3) electrolyte shows reduced donor charge carrier density in the Fe oxide layer and higher open circuit potential, induced by the heat impact during LBW. Polarization curves possibly indicate sensitization, which could result in an increased susceptibility towards intergranular corrosion. Changes introduced by LBW are reversed upon the acquisition of polarization curves, restoring electrochemical properties close to pristine 316L SS. LBW under N 2 protection gas largely prevents the modifications resolved for LBW in ambient air. Overall, although LBW influences the passive surface-film chemistry and affects its electrochemical response, the corrosion current densities remain low and barely affected. This suggests negligible impact of the weld seams on the corrosion of 316L SS bipolar plates in PEMFCs application.
Zitieren
APA
Thimm, O., Alebiosu, I., Hölzle, M., & Brimaud, S. (2026). Resolving the Effect of Laser Beam Welding on the Corrosion Properties of 316L Stainless Steel. Journal of The Electrochemical Society, 173(12), 121503. https://doi.org/10.1149/1945-7111/ae79e3
Vancouver
Thimm O, Alebiosu I, Hölzle M, Brimaud S. Resolving the Effect of Laser Beam Welding on the Corrosion Properties of 316L Stainless Steel. Journal of The Electrochemical Society. 2026;173(12):121503. doi:10.1149/1945-7111/ae79e3
BibTeX
@article{Thimm2026,
author = {Thimm, Oliver and Alebiosu, Ibrahim and Hölzle, Markus and Brimaud, Sylvain},
title = {Resolving the Effect of Laser Beam Welding on the Corrosion Properties of 316L Stainless Steel},
journal = {Journal of The Electrochemical Society},
year = {2026},
volume = {173},
number = {12},
pages = {121503},
doi = {10.1149/1945-7111/ae79e3}
}
EUVIMED