EUVIMEDEUVIMED entdecken
Crossref

Fabrication of flexible polymer composites with tailored anisotropic electrical conductivity via ultrasound-assisted vat photopolymerization

Runsheng Hou, Duy Le, Bart Raeymaekers

The Journal of the Acoustical Society of America · 01.10.2025 · 158 (4_Supplement) · A63-A63

DOI: 10.1121/10.0040133 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of the Acoustical Society of America, erschienen am 01.10.2025. Verfasst von Runsheng Hou und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flexible conductive polymer composites (FCPCs) are critical to advancing flexible electronics because they combine mechanical flexibility and electrical conductivity. Conventional fabrication approaches rely on incorporating a high weight fraction of randomly dispersed conductive filler throughout the polymer to achieve long-range conductivity, which decreases flexibility of the material. Here, we present a method to achieve long-range electrical conductivity in FCPCs without sacrificing flexibility, using ultrasound-assisted vat photopolymerization (VP). Ultrasound wave fields spatially organize a low weight fraction of conductive filler into a percolated, long-range network within a flexible photopolymer matrix. We investigate the influence of fabrication parameters on electrical conductivity under both quasi-static and dynamic loading conditions. Our results show that increasing both the filler fraction and the ultrasound amplitude increases conductivity, achieving a maximum value of 1936 S/m, which surpasses that produced by other methods. Importantly, the resulting FCPCs maintain flexibility, enduring twice the bending strain of composites with a high fraction of randomly distributed filler. To demonstrate the method’s scalability, we fabricate an 18-mm-long strain sensor, which is nearly twice the length achieved by others, and create multilayer FCPCs with complex geometries. These results highlight the promise of ultrasound-assisted VP as a scalable platform for fabricating next-generation flexible electronic devices.

Zitieren

APA

Hou, R., Le, D., & Raeymaekers, B. (2025). Fabrication of flexible polymer composites with tailored anisotropic electrical conductivity via ultrasound-assisted vat photopolymerization. The Journal of the Acoustical Society of America, 158(4_Supplement), A63-A63. https://doi.org/10.1121/10.0040133

Vancouver

Hou R, Le D, Raeymaekers B. Fabrication of flexible polymer composites with tailored anisotropic electrical conductivity via ultrasound-assisted vat photopolymerization. The Journal of the Acoustical Society of America. 2025;158(4_Supplement):A63-A63. doi:10.1121/10.0040133

BibTeX
@article{Hou2025,
  author = {Hou, Runsheng and Le, Duy and Raeymaekers, Bart},
  title = {Fabrication of flexible polymer composites with tailored anisotropic electrical conductivity via ultrasound-assisted vat photopolymerization},
  journal = {The Journal of the Acoustical Society of America},
  year = {2025},
  volume = {158},
  number = {4_Supplement},
  pages = {A63--A63},
  doi = {10.1121/10.0040133}
}
Kostenlos starten →