EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Continuous Vat Photopolymerization for Optical Lens Fabrication

Han Xu, Shuai Chen, Renzhi Hu, Muqun Hu, Yang Xu, Yeowon Yoon, Yong Chen iD

Small · 2023-10 · 19 (40)

DOI: 10.1002/smll.202300517 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 28.05.2023. Verfasst von Han Xu und 6 weiteren Autor:innen. Beteiligte Einrichtung: Center for Advanced Manufacturing, University of Southern California, Los Angeles, CA, 90007, USA. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Center of Excellence in NanoBiophysics, University of Southern California, National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Optical lenses require feature resolution and surface roughness that are beyond most (3D) printing methods. A new continuous projection‐based vat photopolymerization process is reported that can directly shape polymer materials into optical lenses with microscale dimensional accuracy (< 14.7 µm) and nanoscale surface roughness (< 20 nm) without post‐processing. The main idea is to utilize frustum layer stacking, instead of the conventional 2.5D layer stacking, to eliminate staircase aliasing. A continuous change of mask images is achieved using a zooming‐focused projection system to generate the desired frustum layer stacking with controlled slant angles. The dynamic control of image size, objective and imaging distances, and light intensity involved in the zooming‐focused continuous vat photopolymerization are systematically investigated. The experimental results reveal the effectiveness of the proposed process. The 3D‐printed optical lenses with various designs, including parabolic lenses, fisheye lenses, and a laser beam expander, are fabricated with a surface roughness of 3.4 nm without post‐processing. The dimensional accuracy and optical performance of the 3D‐printed compound parabolic concentrators and fisheye lenses within a few millimeters are investiagted. These results highlight the rapid and precise nature of this novel manufacturing process, demonstrating a promising avenue for future optical component and device fabrication.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingcontinuous printingoptical lensslant anglevat polymerization

Autor:innen und Institutionen

  • Center for Advanced Manufacturing, University of Southern California, Los Angeles, CA, 90007, USA.
  • Daniel J. Epstein Department of Industrial and Systems Engineering, University of Southern California, Los Angeles, CA, 90089, USA.
  • Department of Aerospace and Mechanical Engineering, University of Southern California, Los Angeles, CA, 90089, USA.

ORCID-Profile: Yong Chen

Förderung

  • Center of Excellence in NanoBiophysics
  • University of Southern California
  • National Science Foundation

Zitieren

APA

Xu, H., Chen, S., Hu, R., Hu, M., Xu, Y., Yoon, Y., & Chen, Y. (2023). Continuous Vat Photopolymerization for Optical Lens Fabrication. Small, 19(40). https://doi.org/10.1002/smll.202300517

Vancouver

Xu H, Chen S, Hu R, Hu M, Xu Y, Yoon Y, et al. Continuous Vat Photopolymerization for Optical Lens Fabrication. Small. 2023;19(40). doi:10.1002/smll.202300517

BibTeX
@article{Xu2023,
  author = {Xu, Han and Chen, Shuai and Hu, Renzhi and Hu, Muqun and Xu, Yang and Yoon, Yeowon and Chen, Yong},
  title = {Continuous Vat Photopolymerization for Optical Lens Fabrication},
  journal = {Small},
  year = {2023},
  volume = {19},
  number = {40},
  doi = {10.1002/smll.202300517}
}
Kostenlos starten →