Hopping Light Vat Photopolymerization for Multiscale Fabrication
Small · 2023-03 · 19 (11)
DOI: 10.1002/smll.202205784 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 21.12.2022. Verfasst von Yang Xu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Center for Advanced Manufacturing, University of Southern California, Los Angeles, CA, 90007, USA. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Science Foundation.
Abstract (Originalsprache)
3D objects with features spanning from microscale to macroscale have various applications. However, the fabrication of such objects presents challenges to additive manufacturing (AM) due to the tradeoffs among manufacturable feature resolution, maximum build area, and printing speed. This paper presents a projection‐based AM process called hopping light vat photopolymerization (HL‐VPP) to address this critical barrier. The key idea of HL‐VPP is to synchronize linear scanning projection with a galvo mirror's rotation. The projector moves continuously at a constant speed while periodically rotating a one‐axis galvo mirror to compensate for the projector's linear movement so synchronized hopping motion can be achieved. By this means, HL‐VPP can simultaneously achieve large‐area (over 200 mm), fast‐speed (scanning speed of 13.5 mm s ‐1 ), and high‐resolution (10 µm pixel size) fabrication. The distinguishing characteristic of HL‐VPP is that it allows for hundreds of times lower refresh rates without motion blur. Thus, HL‐VPP decouples the fabrication efficiency limit imposed by the refresh rate and will enable super‐fast curing in the future. This work will significantly advance VPP's use in applications that require macroscale part size with microscale features. The process has been verified by fabricating multiple multiscale objects, including microgrids and biomimetic structures.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Center for Advanced Manufacturing, University of Southern California, Los Angeles, CA, 90007, USA.
- Department of Aerospace and Mechanical Engineering, University of Southern California, Los Angeles, CA, 90089, USA.
- School of Engineering Technology, Purdue University, West Lafayette, IN, 47907, USA.
- Mork Family Department of Chemical Engineering and Materials Science, University of Southern California, Los Angeles, CA, 90089, USA.
- Department of Mechanical Engineering, Aalto University, Puumiehenkuja 5, Espoo, 02150, Finland.
- Daniel J. Epstein Department of Industrial and Systems Engineering, University of Southern California, Los Angeles, CA, 90089, USA.
ORCID-Profile: Yong Chen
Förderung
- National Science Foundation
Zitieren
APA
Xu, Y., Mao, H., Liu, C., Du, Z., Yan, W., Yang, Z., Partanen, J., & Chen, Y. (2023). Hopping Light Vat Photopolymerization for Multiscale Fabrication. Small, 19(11). https://doi.org/10.1002/smll.202205784
Vancouver
Xu Y, Mao H, Liu C, Du Z, Yan W, Yang Z, et al. Hopping Light Vat Photopolymerization for Multiscale Fabrication. Small. 2023;19(11). doi:10.1002/smll.202205784
BibTeX
@article{Xu2023,
author = {Xu, Yang and Mao, Huachao and Liu, Cenyi and Du, Zhengyu and Yan, Weijia and Yang, Zhuoyuan and Partanen, Jouni and Chen, Yong},
title = {Hopping Light Vat Photopolymerization for Multiscale Fabrication},
journal = {Small},
year = {2023},
volume = {19},
number = {11},
doi = {10.1002/smll.202205784}
}
EUVIMED