EUVIMEDEUVIMED entdecken
Crossref

Performance of TiAlN multilayer coatings prepared by hybrid multi-arc ion plating and high-power impulse magnetron sputtering

Leilei Chen, Ziran Feng, Yu Gong, Hao Zhang, Xingjian Che

Journal of Vacuum Science & Technology B · 01.07.2026 · 44 (4)

DOI: 10.1116/6.0005359 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Vacuum Science & Technology B, online erschienen am 18.05.2026. Verfasst von Leilei Chen und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben. Gefördert von: Scientific Resrarch Program of China Yangtze Power Co., Ltd.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

TiAlN coatings with different modulation ratios were prepared on 42CrMo4 steel by hybrid multiarc ion plating and high-power impulse magnetron sputtering (HiPIMS). As the HiPIMS fraction increased, the coating surface showed fewer macroparticle-related defects and the cross-sectional structure became more uniform and compact. XRD analysis indicated that all coatings were mainly composed of face-centered cubic (Ti,Al)N with a weak AlN peak, while a slight shift of the (111) peak and an increase in the (200) reflection suggested a modulation-ratio-dependent evolution in texture and structural state. Among the alternating coatings, the critical load (LC2) increased from 22 to 47 N and the wear rate decreased from 4.95 × 10−4 to 2.60 × 10−4 μm3⋅(N μm)−1 as the modulation ratio increased from 1:0.5 to 1:2. Electrochemical tests showed that the 1:2 coating exhibited the lowest corrosion current density, the highest polarization resistance, and the largest capacitive arc radius, indicating the best overall corrosion resistance among the alternating coatings. Overall, increasing the HiPIMS contribution effectively improved the comprehensive performance of the alternating TiAlN coatings.

Förderung

  • Scientific Resrarch Program of China Yangtze Power Co., Ltd

Zitieren

APA

Chen, L., Feng, Z., Gong, Y., Zhang, H., & Che, X. (2026). Performance of TiAlN multilayer coatings prepared by hybrid multi-arc ion plating and high-power impulse magnetron sputtering. Journal of Vacuum Science & Technology B, 44(4). https://doi.org/10.1116/6.0005359

Vancouver

Chen L, Feng Z, Gong Y, Zhang H, Che X. Performance of TiAlN multilayer coatings prepared by hybrid multi-arc ion plating and high-power impulse magnetron sputtering. Journal of Vacuum Science & Technology B. 2026;44(4). doi:10.1116/6.0005359

BibTeX
@article{Chen2026,
  author = {Chen, Leilei and Feng, Ziran and Gong, Yu and Zhang, Hao and Che, Xingjian},
  title = {Performance of TiAlN multilayer coatings prepared by hybrid multi-arc ion plating and high-power impulse magnetron sputtering},
  journal = {Journal of Vacuum Science & Technology B},
  year = {2026},
  volume = {44},
  number = {4},
  doi = {10.1116/6.0005359}
}
Kostenlos starten →