EUVIMEDEUVIMED entdecken
Crossref

Carbon-supported, size-tunable Ni nanoparticles by atomic layer deposition

Young-Wan Kim, Dokyun Kim, HyunJu Lee, Yoo Sei Park, Se-Hun Kwon, Woo-Jae Lee

Journal of Vacuum Science & Technology A · 01.03.2026 · 44 (2)

DOI: 10.1116/6.0005092 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Vacuum Science & Technology A, online erschienen am 17.02.2026. Verfasst von Young-Wan Kim und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: Basic Research project of the Korea Institure of Geoscience and Mineral Resources, Korea of Energy Technology Evaluation and Planning, Ministry of Education and the Busan Metroplitan City.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Uniform nickel nanoparticles (Ni NPs) on carbon black were synthesized by fluidized-bed reactor atomic layer deposition (FBR-ALD). ALD behavior was first established on SiO2 using Ni(dmamb)2 and NH3, yielding pure Ni films with a saturated growth rate as precursor and reactant pulse times increased and exhibiting linear thickness depending on ALD cycle. Based on this, a Ni catalyst was synthesized and its NP size was controlled by varying ALD cycles from 5 to 30. Thermogravimetric analysis demonstrated that Ni loading on carbon increased linearly with the ALD cycle. Transmission electron microscopy showed uniformly dispersed Ni NPs with size ranging from 2.08 to 3.95 nm, and a decrease in areal density from about 2000 to about 1400 counts/μm2 as cycles increased, without severe agglomeration. X-ray photoelectron spectroscopy indicated a size-dependent balance between metallic Ni and surface oxide. Small NPs were readily oxidized, and larger NPs displayed a stronger metallic binding state due to the lower surface-to-volume ratio. In 1 M KOH, hydrogen evolution reaction tests were conducted, indicating that the 20 cycle Ni/C catalyst showed the best performance, with an overpotential of 51 mV at 10 mA/cm2 and a Tafel slope of 114 mV/dec. This ALD route enables uniform Ni NPs with tunable size on carbon black supports, demonstrates the scalability of FBR-ALD, and provides a versatile platform for Ni-based alloy catalysts and atom-level control toward efficient hydrogen catalysis.

Förderung

  • Basic Research project of the Korea Institure of Geoscience and Mineral Resources
  • Korea of Energy Technology Evaluation and Planning
  • Ministry of Education and the Busan Metroplitan City

Zitieren

APA

Kim, Y., Kim, D., Lee, H., Park, Y. S., Kwon, S., & Lee, W. (2026). Carbon-supported, size-tunable Ni nanoparticles by atomic layer deposition. Journal of Vacuum Science & Technology A, 44(2). https://doi.org/10.1116/6.0005092

Vancouver

Kim Y, Kim D, Lee H, Park YS, Kwon S, Lee W. Carbon-supported, size-tunable Ni nanoparticles by atomic layer deposition. Journal of Vacuum Science & Technology A. 2026;44(2). doi:10.1116/6.0005092

BibTeX
@article{Kim2026,
  author = {Kim, Young-Wan and Kim, Dokyun and Lee, HyunJu and Park, Yoo Sei and Kwon, Se-Hun and Lee, Woo-Jae},
  title = {Carbon-supported, size-tunable Ni nanoparticles by atomic layer deposition},
  journal = {Journal of Vacuum Science & Technology A},
  year = {2026},
  volume = {44},
  number = {2},
  doi = {10.1116/6.0005092}
}
Kostenlos starten →