EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Atomic Layer Deposition of Nickel Using Ni(dmamb)2 and ZnO Adhesion Layer Without Plasma

Kaiya Baker, Hayden Brown, Fisseha Gebre, Jiajun Xu iD

Nanomanufacturing and Metrology · 2024-12 · 7 (1)

DOI: 10.1007/s41871-024-00238-5 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomanufacturing and Metrology, online erschienen am 20.09.2024. Verfasst von Kaiya Baker und 3 weiteren Autor:innen. Beteiligte Einrichtung: Center for Advanced Manufacturing in Space Technology and Applied Research (CAM-STAR), University of the District of Columbia, Washington, DC USA. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Aeronautics and Space Administration, Office of Energy Efficiency and Renewable Energy, Directorate for Education and Human Resources.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a novel deposition technique that utilizes diethylzinc (C 4 H 10 ZnO) with H 2 O to form a ZnO adhesion layer was proposed. This technique was followed by the deposition of vaporized nickel(II) 1-dimethylamino-2-methyl-2-butoxide (Ni(dmamb) 2 ) and H 2 gas to facilitate the deposit of uniform layers of nickel on the ZnO adhesion layer using atomic layer deposition. Deposition temperatures ranged from 220 to 300 °C. Thickness, composition, and crystallographic structure results were analyzed using spectroscopic ellipsometry, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD), respectively. An average growth rate of approximately 0.0105 angstroms per cycle at 260 °C was observed via ellipsometry. Uniform deposition of ZnO with less than 1% of Ni was displayed by utilizing the elemental analysis function via SEM, thereby providing high-quality images. XPS revealed ionizations consistent with nickel and ZnO through the kinetic and binding energies of each detected electron. XRD provided supplemental information regarding the validity of ZnO by exhibiting crystalline attributes, revealing the presence of its hexagonal wurtzite structure.

Schlagwörter

Stichwörter der Autor:innen

Atomic layer depositionCharacterization using XRD and XPSNi deposition layerZnO adhesion layer

Autor:innen und Institutionen

  • Center for Advanced Manufacturing in Space Technology and Applied Research (CAM-STAR), University of the District of Columbia, Washington, DC USA.

ORCID-Profile: Jiajun Xu

Förderung

  • National Aeronautics and Space Administration
  • Office of Energy Efficiency and Renewable Energy
  • Directorate for Education and Human Resources
  • National Science Foundation

Zitieren

APA

Baker, K., Brown, H., Gebre, F., & Xu, J. (2024). Atomic Layer Deposition of Nickel Using Ni(dmamb)2 and ZnO Adhesion Layer Without Plasma. Nanomanufacturing and Metrology, 7(1). https://doi.org/10.1007/s41871-024-00238-5

Vancouver

Baker K, Brown H, Gebre F, Xu J. Atomic Layer Deposition of Nickel Using Ni(dmamb)2 and ZnO Adhesion Layer Without Plasma. Nanomanufacturing and Metrology. 2024;7(1). doi:10.1007/s41871-024-00238-5

BibTeX
@article{Baker2024,
  author = {Baker, Kaiya and Brown, Hayden and Gebre, Fisseha and Xu, Jiajun},
  title = {Atomic Layer Deposition of Nickel Using Ni(dmamb)2 and ZnO Adhesion Layer Without Plasma},
  journal = {Nanomanufacturing and Metrology},
  year = {2024},
  volume = {7},
  number = {1},
  doi = {10.1007/s41871-024-00238-5}
}
Kostenlos starten →