Rheological Failure During Three-Dimensional Printing of Polylactic Acid With Thermoviscoplastic Model
Journal of Applied Mechanics · 01.11.2025 · 92 (11)
DOI: 10.1115/1.4069106 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Mechanics, online erschienen am 23.07.2025. Verfasst von Hao Yue und 1 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Polylactic acid (PLA) is widely used during 3D printing and additive manufacturing. However, rheological behaviors of PLA always appear when the fused deposition is applied. In this work, based on the large strain theory, a thermoviscoplastic constitutive model with thermodynamic consistency is proposed to describe PLA during its 3D printing. The plastic proportion depending on the strain rate is introduced to illustrate rheological behaviors. Then, mechanical and rheological properties of PLA are presented to discuss about the effects of temperature and strain rate. By the constitutive relation being implemented into the user subroutine, the finite element simulation is performed to compare with theoretical predictions. Experiment is carried out to show the good agreement, and it is found that PLA illustrates more like fluid with low strain rate and high temperature. This study is expected to further understand rheological characteristics of PLA during its 3D printing and additive manufacturing.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Yue, H., & Wang, Y. (2025). Rheological Failure During Three-Dimensional Printing of Polylactic Acid With Thermoviscoplastic Model. Journal of Applied Mechanics, 92(11). https://doi.org/10.1115/1.4069106
Vancouver
Yue H, Wang Y. Rheological Failure During Three-Dimensional Printing of Polylactic Acid With Thermoviscoplastic Model. Journal of Applied Mechanics. 2025;92(11). doi:10.1115/1.4069106
BibTeX
@article{Yue2025,
author = {Yue, Hao and Wang, Yi-Ze},
title = {Rheological Failure During Three-Dimensional Printing of Polylactic Acid With Thermoviscoplastic Model},
journal = {Journal of Applied Mechanics},
year = {2025},
volume = {92},
number = {11},
doi = {10.1115/1.4069106}
}
EUVIMED