EUVIMEDEUVIMED entdecken
Crossref

Design and Cooling Performance of Additively Manufactured Ceramic Turbine Vanes

Andrew Fox, Stephen Lynch, Jason C. Young, Carl P. Frick, Jennifer Hankins, Kyle Kuhn, Stephan A. Brinckmann, Ray S. Fertig

Journal of Turbomachinery · 01.06.2024 · 146 (6)

DOI: 10.1115/1.4064226 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 29.01.2024. Verfasst von Andrew Fox und 7 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: Office of Fossil Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ceramic materials are of significant interest in aviation and power generation gas turbine engines due to their low density and ability to withstand high temperatures. Increased cycle thermal efficiency and higher specific power output is possible by incorporating ceramic components that enable high turbine inlet temperatures and lower required cooling airflow levels. However, ceramics can be difficult and costly to form into the complex shapes used in gas turbine components, often requiring specialized multi-step processes. Furthermore, ceramic components in the hottest areas of a gas turbine, such as vanes or blade shroud seals, will still likely require cooling which is challenging to implement in conventional ceramic manufacturing approaches. Therefore, this study presents a multidisciplinary approach that investigates the design, fabrication, and overall cooling effectiveness evaluation of additively manufactured (AM), polymer derived ceramic (PDC) turbine vanes. A thermo-mechanically optimized vane design was generated, ceramic additive manufacturing of the complex cooling configuration was developed, and quantification of the increase in overall cooling effectiveness was performed in a 1X scale, high-speed facility using infrared thermography. This study produced a PDC AM process, capable of printing complex internal cooling schemes in 1X scale turbine vanes. It was found that the optimized vane more than doubled the overall cooling effectiveness observed in the baseline design, which reasonably agreed with thermomechanical optimization model predictions. Additionally, the optimized ceramic vane outperformed an identical metal vane, in terms of area averaged cooling effectiveness, suggesting that the ceramic vane could operate at reduced coolant flowrates to achieve comparable levels of cooling performance.

Förderung

  • Office of Fossil Energy

Zitieren

APA

Fox, A., Lynch, S., Young, J. C., Frick, C. P., Hankins, J., Kuhn, K., Brinckmann, S. A., & Fertig, R. S. (2024). Design and Cooling Performance of Additively Manufactured Ceramic Turbine Vanes. Journal of Turbomachinery, 146(6). https://doi.org/10.1115/1.4064226

Vancouver

Fox A, Lynch S, Young JC, Frick CP, Hankins J, Kuhn K, et al. Design and Cooling Performance of Additively Manufactured Ceramic Turbine Vanes. Journal of Turbomachinery. 2024;146(6). doi:10.1115/1.4064226

BibTeX
@article{Fox2024,
  author = {Fox, Andrew and Lynch, Stephen and Young, Jason C. and Frick, Carl P. and Hankins, Jennifer and Kuhn, Kyle and Brinckmann, Stephan A. and Fertig, Ray S.},
  title = {Design and Cooling Performance of Additively Manufactured Ceramic Turbine Vanes},
  journal = {Journal of Turbomachinery},
  year = {2024},
  volume = {146},
  number = {6},
  doi = {10.1115/1.4064226}
}
Kostenlos starten →