EUVIMEDEUVIMED entdecken
Crossref

Visual-Biased Observability Index for Camera-Based Robot Calibration

Shouhei Shirafuji, Hiroki Goto, Xiaotian Zhang, Keiji Okuhara, Noritaka Takamura, Naoya Kagawa, Hiroyasu Baba, Jun Ota

Journal of Mechanisms and Robotics · 01.05.2024 · 16 (5)

DOI: 10.1115/1.4062801 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mechanisms and Robotics, online erschienen am 20.07.2023. Verfasst von Shouhei Shirafuji und 7 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 49 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Efficient robot integration can be realized by matching real and virtual robots, and accurate robot models can be generated by kinematic parameter calibration. End-effector pose selection for pose measurement to discover the positioning errors is critical in kinematic parameter calibration. Ideal pose selection maximizes calibration accuracy for a defined measurement uncertainty and optimizes measurement cost and utility. In the design of the pose selection process, observability indices are widely accepted criteria for effective pose selection to evaluate calibration performance. Observability indices represent the effect of uncertainty in the measured end-effector poses on the calibrated parameters. However, unlike expensive direct measurement using laser, low-cost camera-based kinematic calibration estimates the end-effector poses from the marker points in the captured image. The variance of the detected marker positions biases the end-effector poses and, eventually, the calibrated parameters. Therefore, this study proposes extended observability indices for pose selection based on this bias to realize accurate calibration with a low-cost camera. The target observability index is O1, a scale-free, reliable index used in kinematic calibration. Considering the visual bias, we extended it as Ov1. This study evaluated Ov1 by comparing the positioning accuracies calibrated on poses selected by maximizing it, original O1, O3 known as the best criterion to restrain the end-effector positioning uncertainty, and Ov3, which is the extended O3 for consistency. A ball-bar test showed that the poses selected by the index Ov1 exhibited higher positioning accuracy than the other indices.

Zitieren

APA

Shirafuji, S., Goto, H., Zhang, X., Okuhara, K., Takamura, N., Kagawa, N., Baba, H., & Ota, J. (2024). Visual-Biased Observability Index for Camera-Based Robot Calibration. Journal of Mechanisms and Robotics, 16(5). https://doi.org/10.1115/1.4062801

Vancouver

Shirafuji S, Goto H, Zhang X, Okuhara K, Takamura N, Kagawa N, et al. Visual-Biased Observability Index for Camera-Based Robot Calibration. Journal of Mechanisms and Robotics. 2024;16(5). doi:10.1115/1.4062801

BibTeX
@article{Shirafuji2024,
  author = {Shirafuji, Shouhei and Goto, Hiroki and Zhang, Xiaotian and Okuhara, Keiji and Takamura, Noritaka and Kagawa, Naoya and Baba, Hiroyasu and Ota, Jun},
  title = {Visual-Biased Observability Index for Camera-Based Robot Calibration},
  journal = {Journal of Mechanisms and Robotics},
  year = {2024},
  volume = {16},
  number = {5},
  doi = {10.1115/1.4062801}
}
Kostenlos starten →