EUVIMEDEUVIMED entdecken
Crossref

Iterative Uncertainty Calibration for Modeling Metal Additive Manufacturing Processes Using Statistical Moment-Based Metric

M. Rahmani Dehaghani, Yifan Tang, G. Gary Wang

Journal of Mechanical Design · 01.01.2023 · 145 (1)

DOI: 10.1115/1.4055149 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mechanical Design, online erschienen am 07.10.2022. Verfasst von M. Rahmani Dehaghani und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 23 Literaturangaben. Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metal additive manufacturing (AM) has recently attracted attention due to its potential for batch/mass production of metal parts. This process, however, currently suffers from problems including low productivity, inconsistency in the properties of the printed parts, and defects such as lack of fusion and keyholing. Finite element (FE) modeling cannot accurately model the metal AM process and has a high computational cost. Empirical models based on experiments are time-consuming and expensive. This paper enhances a previously developed framework that takes advantages of both empirical and FE models. The validity and accuracy of the metamodel developed in the earlier framework depend on the initial assumption of parameter uncertainties. This causes a problem when the assumed uncertainties are far from the actual values. The proposed framework introduces an iterative calibration process to overcome this limitation. After comparing several calibration metrics, the second-order statistical moment-based metric (SMM) was chosen as the calibration metric in the improved framework. The framework is then applied to a four-variable porosity modeling problem. The obtained model is more accurate than using other approaches with only ten available experimental data points for calibration and validation.

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Dehaghani, M. R., Tang, Y., & Wang, G. G. (2023). Iterative Uncertainty Calibration for Modeling Metal Additive Manufacturing Processes Using Statistical Moment-Based Metric. Journal of Mechanical Design, 145(1). https://doi.org/10.1115/1.4055149

Vancouver

Dehaghani MR, Tang Y, Wang GG. Iterative Uncertainty Calibration for Modeling Metal Additive Manufacturing Processes Using Statistical Moment-Based Metric. Journal of Mechanical Design. 2023;145(1). doi:10.1115/1.4055149

BibTeX
@article{Dehaghani2023,
  author = {Dehaghani, M. Rahmani and Tang, Yifan and Wang, G. Gary},
  title = {Iterative Uncertainty Calibration for Modeling Metal Additive Manufacturing Processes Using Statistical Moment-Based Metric},
  journal = {Journal of Mechanical Design},
  year = {2023},
  volume = {145},
  number = {1},
  doi = {10.1115/1.4055149}
}
Kostenlos starten →