A Review of the Metal Additive Manufacturing Processes
Materials · 05.12.2023 · 16 (24) · 7514
DOI: 10.3390/ma16247514 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 05.12.2023. Verfasst von Mohaddeseh Tebianian und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Metallurgy and Materials Engineering, Iran University of Science and Technology (IUST), Narmak, Tehran 13114-16846, Iran. Die Arbeit wurde bisher 68-mal zitiert (Crossref) und nennt 93 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agenda ILLIANCE, PRR–Plano de Recuperação e Resiliência under the Next Generation EU, Centre for Mechanical Technology and Automation (TEMA).
Abstract (Originalsprache)
Metal additive manufacturing (AM) is a layer-by-layer process that makes the direct manufacturing of various industrial parts possible. This method facilitates the design and fabrication of complex industrial, advanced, and fine parts that are used in different industry sectors, such as aerospace, medicine, turbines, and jewelry, where the utilization of other fabrication techniques is difficult or impossible. This method is advantageous in terms of dimensional accuracy and fabrication speed. However, the parts fabricated by this method may suffer from faults such as anisotropy, micro-porosity, and defective joints. Metals like titanium, aluminum, stainless steels, superalloys, etc., have been used—in the form of powder or wire—as feed materials in the additive manufacturing of various parts. The main criterion that distinguishes different additive manufacturing processes from each other is the deposition method. With regard to this criterion, AM processes can be divided into four classes: local melting, sintering, sheet forming, and electrochemical methods. Parameters affecting the properties of the additive-manufactured part and the defects associated with an AM process determine the method by which a certain part should be manufactured. This study is a survey of different additive manufacturing processes, their mechanisms, capabilities, shortcomings, and the general properties of the parts manufactured by them.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Metallurgy and Materials Engineering, Iran University of Science and Technology (IUST), Narmak, Tehran 13114-16846, Iran.
- TEMA: Centre for Mechanical Technology and Automation, Department of Mechanical Engineering, University of Aveiro, Campus de Santiago, 3810-193 Aveiro, Portugal.
- State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China.
- School of Mechanical and Automotive Engineering, Shanghai University of Engineering Science, Shanghai 201620, China.
ORCID-Profile: Seyed Reza Elmi Hosseini, António B Pereira, Fábio A O Fernandes, Chao Chen, Yuanming Huo
Förderung
- Agenda ILLIANCE
- PRR–Plano de Recuperação e Resiliência under the Next Generation EU
- Centre for Mechanical Technology and Automation (TEMA)
Zitieren
APA
Tebianian, M., Aghaie, S., Razavi Jafari, N. S., Elmi Hosseini, S. R., Pereira, A. B., Fernandes, F. A. O., Farbakhti, M., Chen, C., & Huo, Y. (2023). A Review of the Metal Additive Manufacturing Processes. Materials, 16(24), 7514. https://doi.org/10.3390/ma16247514
Vancouver
Tebianian M, Aghaie S, Razavi Jafari NS, Elmi Hosseini SR, Pereira AB, Fernandes FAO, et al. A Review of the Metal Additive Manufacturing Processes. Materials. 2023;16(24):7514. doi:10.3390/ma16247514
BibTeX
@article{Tebianian2023,
author = {Tebianian, Mohaddeseh and Aghaie, Sara and Razavi Jafari, Nazanin Sadat and Elmi Hosseini, Seyed Reza and Pereira, António B and Fernandes, Fábio A O and Farbakhti, Mojtaba and Chen, Chao and Huo, Yuanming},
title = {A Review of the Metal Additive Manufacturing Processes},
journal = {Materials},
year = {2023},
volume = {16},
number = {24},
pages = {7514},
doi = {10.3390/ma16247514}
}
EUVIMED