EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Real-Time Modeling for Design and Control of Material Additive Manufacturing Processes

Amir M. Horr

Metals · 08.11.2024 · 14 (11) · 1273

DOI: 10.3390/met14111273 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 08.11.2024. Verfasst von Amir M. Horr. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Austrian Federal Ministry for Climate Action, Environment, Energy, Mobility, Innovation and Technology, Austrian Research Promotion Agency (FFG), Austrian Institute of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The use of digital twin and shadow concepts for industrial material processes has introduced new approaches to bridge the gap between physical and cyber manufacturing processes. Consequently, many multidisciplinary areas, such as advanced sensor technologies, material science, data analytics, and machine learning algorithms, are employed to create these hybrid systems. Meanwhile, new additive manufacturing (AM) processes for metals and polymers, based on emerging technologies, have shown promise for the manufacturing of sophisticated parts with complex geometries. These processes are undergoing a major transformation with the advent of digital technology, hybrid physical-data-driven modeling, and fast-reduced models. This study presents a fresh perspective on hybrid physical-data-driven and reduced order modeling (ROM) techniques for the digitalization of AM processes within a digital twin concept. The main contribution of this study is to demonstrate the benefits of ROM and machine learning (ML) technologies for process data handling, optimization/control, and their integration into the real-time assessment of AM processes. Therefore, a novel combination of efficient data-solver technology and an architecturally designed neural network (NN) module is developed for transient manufacturing processes with high heating/cooling rates. Furthermore, a real-world case study is presented, showcasing the use of hybrid modeling with ROM and ML schemes for an industrial wire arc AM (WAAM) process.

Förderung

  • Austrian Federal Ministry for Climate Action, Environment, Energy, Mobility, Innovation and Technology
  • Austrian Research Promotion Agency (FFG)
  • Austrian Institute of Technology

Zitieren

APA

Horr, A. M. (2024). Real-Time Modeling for Design and Control of Material Additive Manufacturing Processes. Metals, 14(11), 1273. https://doi.org/10.3390/met14111273

Vancouver

Horr AM. Real-Time Modeling for Design and Control of Material Additive Manufacturing Processes. Metals. 2024;14(11):1273. doi:10.3390/met14111273

BibTeX
@article{Horr2024,
  author = {Horr, Amir M.},
  title = {Real-Time Modeling for Design and Control of Material Additive Manufacturing Processes},
  journal = {Metals},
  year = {2024},
  volume = {14},
  number = {11},
  pages = {1273},
  doi = {10.3390/met14111273}
}
Kostenlos starten →