EUVIMEDAvasta EUVIMED
VergleichsstudieOpen access · CC BY 4.0

Evaluation of thickness of 3D printed versus thermoformed aligners: A prospective in vivo ageing experiment

Babak Sayahpour, Sara Eslami iD, Jakob Stuhlfelder, Sarah Bühling, Iulia Dahmer, Malcolm Goteni, Stefan Kopp, Ludovica Nucci

Orthodontics & Craniofacial Research · 2024

DOI: 10.1111/ocr.12822 ↗

At a glance

Vergleichsstudie in Orthodontics & Craniofacial Research, 2024. Written by Babak Sayahpour and 7 co-authors. Institution: Department of Orthodontics, Johann-Wolfgang Goethe University, Frankfurt am Main, Germany. Major MEDLINE topics: Printing, Three-Dimensional. Cited 14 times so far (Crossref); 36 references. The full text is freely available (open access, CC BY 4.0).

AbstraktSubjectsBibliograafilised andmedCiteRelated studies

Abstract (original language)

Background

To compare and investigate the effects of intraoral ageing on the thickness of one group of directly printed and two groups of thermoformed aligners on the labial surface of maxillary central incisors. Materials and Methods Six groups (12 samples per group) were included in this prospective in vivo experiment. Groups DP‐Clin, INV‐Clin and CA‐Clin consisted of directly printed (Tera Harz TC‐85 DAC resin), thermoformed (Invisalign, PU based polymer) and in house thermoformed (CA‐Pro, PET‐G based polymer) aligners, retrieved after 1 week of intraoral service. Groups DP‐Ctr, INV‐Ctr and CA‐Ctr included unused aligners samples. Thickness measurements were conducted using confocal laser scanning microscopy (CLSM). Data that underwent log‐10 transformation was analysed by multiple linear regression analysis ( p < .05).

Results

Statistically significant differences were found between the materials in both Clin and Ctr categories ( p < .001). Group DP had the highest thickness among the groups and the least thickness was observed in the CA group ( p < .001). However, intraoral ageing did not significantly affect the aligner thickness of any groups.

Conclusions

Both thermoforming and direct printing of clear aligners led to thickness deviations in terms of increase for printed aligners and decrease for thermoformed aligners. Intraoral ageing did not affect the aligner thickness in any of the groups.

Subjects

MeSH terms (MEDLINE)

Printing, Three-DimensionalProspective StudiesHumansMicroscopy, ConfocalIncisorTooth Movement TechniquesOrthodontic Appliance DesignOrthodontic AppliancesMaterials TestingTime FactorsMale

Author keywords

3D printingclear orthodontic alignersdirectly printed alignersintraoral ageingthermoformingthermoplasticthickness

Authors and institutions

  • Department of Orthodontics, Johann-Wolfgang Goethe University, Frankfurt am Main, Germany.
  • Institute of Biostatistics and Mathematical Modelling, Faculty of Medicine, J. W. Goethe University Frankfurt, Frankfurt am Maine, Germany.
  • Private Orthodontic Practice, Duesseldorf, Germany.
  • Multidisciplinary Department of Medical-Surgical and Dental Specialties, University of Campania Luigi Vanvitelli, Naples, Italy.

ORCID profiles: Sara Eslami

Cite

APA

Sayahpour, B., Eslami, S., Stuhlfelder, J., Bühling, S., Dahmer, I., Goteni, M., Kopp, S., & Nucci, L. (2024). Evaluation of thickness of 3D printed versus thermoformed aligners: A prospective in vivo ageing experiment. Orthodontics & Craniofacial Research. https://doi.org/10.1111/ocr.12822

Vancouver

Sayahpour B, Eslami S, Stuhlfelder J, Bühling S, Dahmer I, Goteni M, et al. Evaluation of thickness of 3D printed versus thermoformed aligners: A prospective in vivo ageing experiment. Orthodontics & Craniofacial Research. 2024. doi:10.1111/ocr.12822

BibTeX
@article{Sayahpour2024,
  author = {Sayahpour, Babak and Eslami, Sara and Stuhlfelder, Jakob and Bühling, Sarah and Dahmer, Iulia and Goteni, Malcolm and Kopp, Stefan and Nucci, Ludovica},
  title = {Evaluation of thickness of 3D printed versus thermoformed aligners: A prospective in vivo ageing experiment},
  journal = {Orthodontics & Craniofacial Research},
  year = {2024},
  doi = {10.1111/ocr.12822}
}
Start for free →