EUVIMEDEUVIMED entdecken
Vergleichsstudie

Effects of various polishing processes on surface morphology, corrosion resistance, and RPD framework adaptation of SLM‐printed dental Co–Cr alloys

Jiawen Gan, Hanzhi Zhang, Jian Sun, Chenyuan Zhu, Ting Jiao

Journal of Prosthodontics · 2026

DOI: 10.1111/jopr.70013 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift Journal of Prosthodontics, 2026. Verfasst von Jiawen Gan und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine; College of Stomatology, Shanghai Ji…. Hauptthemen laut MEDLINE: Chromium Alloys, Dental Polishing, Denture, Partial, Removable, Denture Design. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 27 Literaturangaben. Gefördert von: Shanghai Committee of Science and Technology of China, Technology Development Fund Project in Fengxian District in Shanghai, Cross-disciplinary Research Fund of Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

This in vitro study aims to compare the effects of electrolytic polishing (EP), plasma electrolytic polishing (PP), dry electropolishing (DP), and their combination on the surface characteristics, corrosion resistance, and material reduction of selective laser melting (SLM) printed dental cobalt–chromium (Co–Cr) alloy. Materials and Methods Standard samples and removable partial denture (RPD) frameworks were SLM‐printed and then polished using the following methods: mechanical polishing (MP), EP, PP, DP, PDP (PP + DP), DPP (DP + PP), and PDPP (PP + DP + PP). Surface characteristics were analyzed using optical profilometry, scanning electron microscopy (SEM), and x‐ray photoelectron spectroscopy (XPS). Corrosion resistance was assessed through electrochemical testing and ion release experiments. The metal reduction was evaluated by measuring weight loss, major connector and clasp thickness loss, and framework adaptation. The post‐processing time for the technician's fine polishing of these frameworks was recorded to further evaluate the polishing quality of the frameworks. All measurements were presented as mean ±standard deviation. Statistical data were analyzed using analysis of variance (ANOVA) and nonparametric one‐way analysis.

Results

The MP group exhibited the lowest roughness (0.04 ± 0.01 µm), followed by the PDPP group (0.49 ± 0.12 µm). All groups had a passivation film composition predominantly composed of Cr 2 O 3 , with a small amount of CrO 3 observed in the PDP group. PDPP exhibited minimal ion release (0.12 µg/cm 2 ) and stable Nyquist plots. PDPP can significantly reduce the technician's post‐processing time (45.75 s, p < 0.05) without compromising the adaptation of the frameworks.

Conclusions

PDPP forms a stable passivation film with extremely low ion release and a highly smooth, uniform surface. This significantly reduces the time required for manual post‐processing while maintaining the accuracy of RPD frameworks, making it highly suitable for large‐scale clinical framework polishing.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Chromium AlloysDental PolishingDenture, Partial, RemovableDenture DesignSurface PropertiesMaterials TestingCorrosionMicroscopy, Electron, ScanningPhotoelectron SpectroscopyHumansLasersElectrolysis

Stichwörter der Autor:innen

corrosion resistancedental adaptationdental polishingremovable partial denture frameworksurface roughness

Substanzen

Chromium Alloys

Autor:innen und Institutionen

  • Department of Prosthodontics, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine; College of Stomatology, Shanghai Jiao Tong University; National Cancer for Stomatology; National Clinical…
  • Department of Stomatology, Fengcheng Hospital of Fengxian District, Shanghai, PR China.

Förderung

  • Shanghai Committee of Science and Technology of China
  • Technology Development Fund Project in Fengxian District in Shanghai
  • Cross-disciplinary Research Fund of Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Gan, J., Zhang, H., Sun, J., Zhu, C., & Jiao, T. (2026). Effects of various polishing processes on surface morphology, corrosion resistance, and RPD framework adaptation of SLM‐printed dental Co–Cr alloys. Journal of Prosthodontics. https://doi.org/10.1111/jopr.70013

Vancouver

Gan J, Zhang H, Sun J, Zhu C, Jiao T. Effects of various polishing processes on surface morphology, corrosion resistance, and RPD framework adaptation of SLM‐printed dental Co–Cr alloys. Journal of Prosthodontics. 2026. doi:10.1111/jopr.70013

BibTeX
@article{Gan2026,
  author = {Gan, Jiawen and Zhang, Hanzhi and Sun, Jian and Zhu, Chenyuan and Jiao, Ting},
  title = {Effects of various polishing processes on surface morphology, corrosion resistance, and RPD framework adaptation of SLM‐printed dental Co–Cr alloys},
  journal = {Journal of Prosthodontics},
  year = {2026},
  doi = {10.1111/jopr.70013}
}
Kostenlos starten →