EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of sintering on the translucency of CAD–CAM lithium disilicate restorations: A comparative in vitro study

Carlos A Jurado iD, Kelvin I Afrashtehfar iD, Jared Hyer iD, Abdulaziz Alhotan iD

Journal of Prosthodontics · 2023

DOI: 10.1111/jopr.13644 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontics, 2023. Verfasst von Carlos A Jurado und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, The University of Iowa College of Dentistry and Dental Clinics, Iowa City, Iowa, USA. Hauptthemen laut MEDLINE: Amber, Dental Porcelain. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: King Saud University, Universität Bern.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

The available independent data on the translucency of novel pre and fully sintered chairside computer‐aided design and computer‐aided manufacturing (CAD–CAM) lithium disilicate are limited. This comparative in vitro study evaluated the translucency degree of pre and fully sintered chairside CAD–CAM lithium disilicate crowns after optional, required, and additional firing processes. Materials and methods One hundred and five maxillary left central incisor crowns manufactured by three different CAD–CAM lithium disilicate brands shade A1 were assigned into seven groups as follows ( n = 15): (1) Straumann n!ce without sintering; (2) Straumann n!ce with one additional sintering process; (3) Straumann n!ce with two additional sintering processes; (4) Amber Mill with one sintering process; (5) Amber Mill with two sintering processes; (6) IPS e.max CAD with one sintering process; and (7) IPS e.max CAD with two sintering processes. The translucency of all crowns was evaluated with a color imaging spectrophotometer. All statistical analyses were performed using statistical software. A standard level of significance was set at α < 0.05.

Results

All the milled crowns presented different degrees of translucency, and additional sintering processes altered it. IPS e.max CAD with two (4.33 ± 0.26) and one (4.01 ± 0.15) sintering processes displayed the highest translucency, whereas Straumann n!ce with no sintering process provided the lowest value (2.82 ± 0.16).

Conclusions

The translucency of chairside lithium disilicate single‐unit full‐coverage restorations manufactured with subtractive technology was significantly influenced by the brand and the number of sintering processes. The traditional presintered IPS e.max CAD and the fully crystallized glass–ceramic Straumann n!ce considerably increased the translucency after one additional firing process, whereas Amber Mill decreased its translucency.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AmberDental PorcelainCeramicsCrownsComputer-Aided DesignMaterials Testing

Stichwörter der Autor:innen

CAD-CAMcomputer-aided manufacturingcosmetic dentistrydental ceramicsdisilicate lithiumesthetic dentistryfull-coverage restorationin vitromachinedmilledpre-sinterizationsingle crownsinteringsubtractive computer-aided manufacturingtranslucency

Substanzen

lithia disilicateAmberDental Porcelain

Autor:innen und Institutionen

  • Department of Prosthodontics, The University of Iowa College of Dentistry and Dental Clinics, Iowa City, Iowa, USA.
  • Clinical Sciences Department, College of Dentistry, Ajman University, Ajman City, UAE.
  • Department of Reconstructive Dentistry and Gerodontology, School of Dental Medicine, University of Bern, Bern, Switzerland.
  • A.T. Still University Arizona School of Dentistry and Oral Health, Mesa, Arizona, USA.
  • Department of Dental Health, College of Applied Medical Sciences, King Saud University, Riyadh, Saudi Arabia.

ORCID-Profile: Carlos A Jurado, Kelvin I Afrashtehfar, Jared Hyer, Abdulaziz Alhotan

Förderung

  • King Saud University
  • Universität Bern

Zitieren

APA

Jurado, C. A., Afrashtehfar, K. I., Hyer, J., & Alhotan, A. (2023). Effect of sintering on the translucency of CAD–CAM lithium disilicate restorations: A comparative in vitro study. Journal of Prosthodontics. https://doi.org/10.1111/jopr.13644

Vancouver

Jurado CA, Afrashtehfar KI, Hyer J, Alhotan A. Effect of sintering on the translucency of CAD–CAM lithium disilicate restorations: A comparative in vitro study. Journal of Prosthodontics. 2023. doi:10.1111/jopr.13644

BibTeX
@article{Jurado2023,
  author = {Jurado, Carlos A and Afrashtehfar, Kelvin I and Hyer, Jared and Alhotan, Abdulaziz},
  title = {Effect of sintering on the translucency of CAD–CAM lithium disilicate restorations: A comparative in vitro study},
  journal = {Journal of Prosthodontics},
  year = {2023},
  doi = {10.1111/jopr.13644}
}
Kostenlos starten →