EUVIMEDSkopri EUVIMED
Open access · CC BY 4.0

Influence of Finish Line and CAM Unit on the Marginal Adaptation and Margin Trueness of Lithium Disilicate Glass‐Ceramic and Composite Resin Onlay Restorations

João Pitta iD, Gülce Çakmak iD, Maurice Salem, Philippe Mojon, Irena Sailer iD, Philippe Boitelle

Journal of Esthetic and Restorative Dentistry · 2026

DOI: 10.1111/jerd.70087 ↗

At a glance

Journal article in Journal of Esthetic and Restorative Dentistry, 2026. Written by João Pitta and 5 co-authors. Institution: Division of Fixed Prosthodontics and Biomaterials, University Clinics of Dental Medicine, University of Geneva, Geneva, Switzerland. Major MEDLINE topics: Composite Resins, Dental Marginal Adaptation, Dental Porcelain, Ceramics. Cited 1 times so far (Crossref); 37 references. The full text is freely available (open access, CC BY 4.0).

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Objective

To evaluate the marginal adaptation and margin trueness of lithium disilicate glass‐ceramic (LDS) and glass‐filler reinforced composite resin (CR) onlays fabricated using three different finish lines and two chairside CAM units (4‐ and 5‐axis).

Methods

LDS (e.max CAD) and CR (Tetric CAD) onlays were fabricated on butt joint, chamfer, and bevel finish lines using 4‐axis (CEREC MC XL) and 5‐axis (Programill One) chairside CAM units ( N = 120). Onlays were scanned for margin trueness and marginal adaptation analyses. Data were analyzed with three‐way ANOVA and Tukey B post hoc test ( α = 0.05).

Results

A significant interaction was found among finish line, material, and CAM unit for marginal adaptation and margin trueness ( p < 0.001). Bevel had the highest marginal adaptation; chamfer the lowest. Butt joint showed the highest margin trueness; bevel the lowest. CR onlays had better marginal adaptation than LDS with bevel finish lines, regardless of CAM unit. Overall, 5‐axis CAM units yielded better margin trueness.

Conclusions

Finish line design, restorative material, and CAM unit affected the marginal adaptation and margin trueness. The bevel finish line yielded the highest marginal adaptation and the chamfer the lowest, regardless of material or CAM unit. Conversely, the butt joint showed the highest margin trueness, and the bevel the lowest. Clinical Significance Finish line design, material type, and CAM unit selection may affect marginal adaptation and margin trueness of onlays. A bevel finish line may improve marginal adaptation, while a butt joint finish line may enhance margin trueness. Using a 5‐axis CAM unit can improve trueness, particularly with bevel and chamfer finish lines and composite resin materials.

Subjects

MeSH terms (MEDLINE)

Composite ResinsDental Marginal AdaptationDental PorcelainCeramicsInlaysComputer-Aided DesignHumansDental Prosthesis DesignMaterials Testing

Author keywords

CAM unitbevelbutt jointchamfercomposite resinlithium disilicateonlay

Substances

Composite Resinslithia disilicateDental PorcelainGlass ceramics

Authors and institutions

  • Division of Fixed Prosthodontics and Biomaterials, University Clinics of Dental Medicine, University of Geneva, Geneva, Switzerland.
  • Department of Reconstructive Dentistry and Gerodontology, School of Dental Medicine, University of Bern, Bern, Switzerland.
  • Department of Prosthodontics, Geriatric Dentistry and Craniomandibular Disorders, Charité-Universitätsmedizin Berlin, Corporate Member of Freie Universität Berlin and Humboldt-Universität Zu Berlin, Berlin, Germany.
  • Department of Prosthodontics, Faculty of Dentistry, Biruni University, Istanbul, Turkey.
  • Prosthodontic Department, Faculty of Dentistry, Lille University, Lille University Medical Center, Lille, France.

ORCID profiles: João Pitta, Gülce Çakmak, Irena Sailer

Cite

APA

Pitta, J., Çakmak, G., Salem, M., Mojon, P., Sailer, I., & Boitelle, P. (2026). Influence of Finish Line and CAM Unit on the Marginal Adaptation and Margin Trueness of Lithium Disilicate Glass‐Ceramic and Composite Resin Onlay Restorations. Journal of Esthetic and Restorative Dentistry. https://doi.org/10.1111/jerd.70087

Vancouver

Pitta J, Çakmak G, Salem M, Mojon P, Sailer I, Boitelle P. Influence of Finish Line and CAM Unit on the Marginal Adaptation and Margin Trueness of Lithium Disilicate Glass‐Ceramic and Composite Resin Onlay Restorations. Journal of Esthetic and Restorative Dentistry. 2026. doi:10.1111/jerd.70087

BibTeX
@article{Pitta2026,
  author = {Pitta, João and Çakmak, Gülce and Salem, Maurice and Mojon, Philippe and Sailer, Irena and Boitelle, Philippe},
  title = {Influence of Finish Line and CAM Unit on the Marginal Adaptation and Margin Trueness of Lithium Disilicate Glass‐Ceramic and Composite Resin Onlay Restorations},
  journal = {Journal of Esthetic and Restorative Dentistry},
  year = {2026},
  doi = {10.1111/jerd.70087}
}
Start for free →