EUVIMEDObjevte EUVIMED
VergleichsstudieOpen access · CC BY 4.0

Accuracy of CAD / CAM Technology in Fabricating Custom Post‐and‐Core Restorations: A Comparative Analysis

Petros Mourouzis iD, Dimitrios Dionysopoulos, Kosmas Tolidis

Journal of Esthetic and Restorative Dentistry · 2025-06 · 37 (6) · 1575-1584

DOI: 10.1111/jerd.13438 ↗

At a glance

Vergleichsstudie in Journal of Esthetic and Restorative Dentistry, published online on 2025-02-12. Written by Petros Mourouzis and 2 co-authors. Institution: Department of Dental Tissues Pathology and Therapeutics, Division of Operative Dentistry, Faculty of Dentistry, Aristotle University of Thessaloniki,…. Major MEDLINE topics: Dental Prosthesis Design, Post and Core Technique, Dental Impression Technique, Dental Pulp Cavity. Cited 9 times so far (Crossref); 42 references. The full text is freely available (open access, CC BY 4.0).

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

Objective

This study aims to compare the accuracy of various intraoral scanners and traditional analog impressions in scanning root canals for CAD/CAM post‐fabrication.

Methods

A dental mannequin with a factory‐made #21 tooth root canal was used to simulate clinical settings. Three intraoral scanners were tested: CEREC Primescan, TRIOS 3, and CEREC Omnicam. The inEos X5 desktop scanner provided high‐resolution control images. The analog impression polyvinyl siloxane (PVS) material was used with custom trays, following standard protocols. The surface areas were measured with CAD software and compared with the desktop scanner's reference.

Results

Primescan demonstrated the highest accuracy among the intraoral scanners, followed by Trios 3 and Omnicam. Significant differences were found between each scanner and the true surface area. The analog impression method demonstrated superior accuracy compared with intraoral scanners; however, this high precision is attributed to irregularities in the silicone material.

Conclusions

The analog impression method was more accurate in capturing the details of complex root canal anatomy; however, material irregularities can affect its clinical efficacy. Intraoral scanners showed high accuracy but had some limitations in capturing complex geometries. Further development of scanner technology will increase precision and, therefore, the clinical outcome. Clinical Significance The use of CAD/CAM technology and intraoral scanners offers potential for precise, custom‐fit post‐and‐core restorations.

Subjects

MeSH terms (MEDLINE)

Dental Prosthesis DesignPost and Core TechniqueDental Impression TechniqueDental Pulp CavityRadiography, DentalManikinsHumansRoot Canal TherapySiloxanesDental Impression MaterialsComputer-Aided Design

Substances

SiloxanesDental Impression Materials

Authors and institutions

  • Department of Dental Tissues Pathology and Therapeutics, Division of Operative Dentistry, Faculty of Dentistry, Aristotle University of Thessaloniki, Thessaloniki, Greece.

ORCID profiles: Petros Mourouzis

Cite

APA

Mourouzis, P., Dionysopoulos, D., & Tolidis, K. (2025). Accuracy of CAD / CAM Technology in Fabricating Custom Post‐and‐Core Restorations: A Comparative Analysis. Journal of Esthetic and Restorative Dentistry, 37(6), 1575-1584. https://doi.org/10.1111/jerd.13438

Vancouver

Mourouzis P, Dionysopoulos D, Tolidis K. Accuracy of CAD / CAM Technology in Fabricating Custom Post‐and‐Core Restorations: A Comparative Analysis. Journal of Esthetic and Restorative Dentistry. 2025;37(6):1575-1584. doi:10.1111/jerd.13438

BibTeX
@article{Mourouzis2025,
  author = {Mourouzis, Petros and Dionysopoulos, Dimitrios and Tolidis, Kosmas},
  title = {Accuracy of CAD / CAM Technology in Fabricating Custom Post‐and‐Core Restorations: A Comparative Analysis},
  journal = {Journal of Esthetic and Restorative Dentistry},
  year = {2025},
  volume = {37},
  number = {6},
  pages = {1575--1584},
  doi = {10.1111/jerd.13438}
}
Start for free →