EUVIMEDObjevte EUVIMED
Übersichtsarbeit

Parameters to Improve the Accuracy of Intraoral Scanners for Fabricating Tooth‐Supported Restorations

Marta Revilla-León iD, John C Kois

Journal of Esthetic and Restorative Dentistry · 2025-01 · 37 (1) · 277-287

DOI: 10.1111/jerd.13364 ↗

At a glance

Übersichtsarbeit in Journal of Esthetic and Restorative Dentistry, published online on 2024-11-07. Written by Marta Revilla-León and 1 co-authors. Institution: Department of Prosthodontics, School of Dental Medicine, Tufts University, Boston, Massachusetts, USA. Major MEDLINE topics: Dental Prosthesis Design, Dental Restoration, Permanent. Cited 8 times so far (Crossref); 90 references.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

Objectives

To review the factors that impact the accuracy of intraoral scanners (IOSs) when fabricating tooth‐supported restorations. Overview Factors can have a different impact on IOS accuracy depending on the scanning purpose. If the goal is to fabricate tooth‐supported restorations, it is essential to review the following operator‐related factors: IOS technology and system, scan extension and starting quadrant, scanning pattern, scanning distance, and rescanning methods. Additionally, it is critical to interpret the following patient‐related factors differently: edentulous spaces, presence of existing restorations on adjacent teeth, and characteristics of the tooth preparation (build‐up material, geometry, total occlusal convergence [TOC], finish line location, and surface finishing), and interdental spaces (between tooth preparations or between preparation and the adjacent tooth).

Conclusions

For crown or short‐span fixed dental prostheses, a reduced scan extension is recommended. For complete‐arch scans, it is advisable to start the scan in the same quadrant as the preparation. If the IOS permits locking the scan, rescanning may be indicated. Restorations on tooth preparations and adjacent teeth reduce accuracy. The simpler the geometry and the larger the TOC, the higher the IOS accuracy. Intracrevicular finish lines result in lower accuracy than equigingival or supragingival positions. Air‐particle procedures showed better accuracy than coarse and fine grit and immediate dentin sealing. The greater the space between a preparation and the adjacent tooth, the better the accuracy. Clinical Implications Dental professionals must understand and handle the factors that impact the scanning accuracy of intraoral scanners differently depending on the purpose of the scan.

Subjects

MeSH terms (MEDLINE)

Dental Prosthesis DesignDental Restoration, PermanentHumansDental Impression TechniqueComputer-Aided Design

Author keywords

accuracydigital facebowdigital occlusiondigital scansintraoral scannersjaw‐tracking systemsmaxillary cast transfervirtual articulators

Authors and institutions

  • Department of Prosthodontics, School of Dental Medicine, Tufts University, Boston, Massachusetts, USA.
  • Department of Restorative Dentistry, School of Dentistry, University of Washington, Seattle, Washington, USA.
  • Research and Digital Dentistry, Kois Center, Seattle, Washington, USA.
  • Kois Center, Private Practice, Seattle, Washington, USA.

ORCID profiles: Marta Revilla-León

Cite

APA

Revilla-León, M., & Kois, J. C. (2025). Parameters to Improve the Accuracy of Intraoral Scanners for Fabricating Tooth‐Supported Restorations. Journal of Esthetic and Restorative Dentistry, 37(1), 277-287. https://doi.org/10.1111/jerd.13364

Vancouver

Revilla-León M, Kois JC. Parameters to Improve the Accuracy of Intraoral Scanners for Fabricating Tooth‐Supported Restorations. Journal of Esthetic and Restorative Dentistry. 2025;37(1):277-287. doi:10.1111/jerd.13364

BibTeX
@article{RevillaLen2025,
  author = {Revilla-León, Marta and Kois, John C},
  title = {Parameters to Improve the Accuracy of Intraoral Scanners for Fabricating Tooth‐Supported Restorations},
  journal = {Journal of Esthetic and Restorative Dentistry},
  year = {2025},
  volume = {37},
  number = {1},
  pages = {277--287},
  doi = {10.1111/jerd.13364}
}
Start for free →