EUVIMEDEUVIMED entdecken
Fallbericht

Novel model-less fully digital workflow for implant superstructures in an esthetic zone: A technical report

Shinpei Tanaka, Emi Kamimura-Sugimura, Tomoyuki Shimoyama, Kazuyoshi Baba

Journal of Prosthodontic Research · 2023

DOI: 10.2186/jpr.jpr_d_21_00246 ↗

Kurz gefasst

Fallbericht in der Zeitschrift Journal of Prosthodontic Research, 2023. Verfasst von Shinpei Tanaka und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, Showa University School of Dentistry, Tokyo, Japan. Hauptthemen laut MEDLINE: Computer-Aided Design, Workflow, Esthetics, Dental, Dental Prosthesis Design. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 8 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PURPOSE: This report introduces a fully digital workflow for the fabrication of implant superstructures in an esthetic zone using an intraoral scanner (IOS), computer-aided design/computer-aided manufacturing (CAD/CAM) technology, and monolithic multilayer zirconia. METHODS: Digital impressions of scan bodies and occlusal registration were made in the esthetic zone using an IOS. The provisional restoration in the oral cavity was scanned, and the provisional restoration with an optimized surface morphology of the subgingival contour was scanned outside the oral cavity. These morphological data were integrated into the CAD software to generate a digital cast. The morphology of the final superstructure was generated based on morphological data of the provisional restoration. The final superstructure was fabricated from monolithic multilayer zirconia using a CAM machine, sintered, colored with a stain material, and subsequently bonded to a titanium base using resin cement. CONCLUSIONS: The superstructure was successfully fabricated using a model-less, fully digital workflow, and delivered to the patient. No clinical complications were reported. Thus, within the limitations of this report, the novel developed superstructure fabrication techniques can change the clinical and laboratory workflows from analog to digital in the esthetic zone.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Computer-Aided DesignWorkflowEsthetics, DentalDental Prosthesis DesignDental ImplantsDental Prosthesis, Implant-SupportedHumansZirconiumDental Impression Technique

Stichwörter der Autor:innen

CAD/CAMDigital impressionFully digital workflowImplant superstructureMultilayer zirconia

Substanzen

zirconium oxideZirconiumDental Implants

Autor:innen und Institutionen

  • Department of Prosthodontics, Showa University School of Dentistry, Tokyo, Japan.
  • Dental Laboratory, Showa University Dental Hospital, Tokyo, Japan.

Zitieren

APA

Tanaka, S., Kamimura-Sugimura, E., Shimoyama, T., & Baba, K. (2023). Novel model-less fully digital workflow for implant superstructures in an esthetic zone: A technical report. Journal of Prosthodontic Research. https://doi.org/10.2186/jpr.jpr_d_21_00246

Vancouver

Tanaka S, Kamimura-Sugimura E, Shimoyama T, Baba K. Novel model-less fully digital workflow for implant superstructures in an esthetic zone: A technical report. Journal of Prosthodontic Research. 2023. doi:10.2186/jpr.jpr_d_21_00246

BibTeX
@article{Tanaka2023,
  author = {Tanaka, Shinpei and Kamimura-Sugimura, Emi and Shimoyama, Tomoyuki and Baba, Kazuyoshi},
  title = {Novel model-less fully digital workflow for implant superstructures in an esthetic zone: A technical report},
  journal = {Journal of Prosthodontic Research},
  year = {2023},
  doi = {10.2186/jpr.jpr_d_21_00246}
}
Kostenlos starten →