Parameters to Improve the Accuracy of Intraoral Scanners for Fabricating Tooth‐Supported Restorations
Journal of Esthetic and Restorative Dentistry · 2025-01 · 37 (1) · 277-287
DOI: 10.1111/jerd.13364 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Journal of Esthetic and Restorative Dentistry, online erschienen am 07.11.2024. Verfasst von Marta Revilla-León und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, School of Dental Medicine, Tufts University, Boston, Massachusetts, USA. Hauptthemen laut MEDLINE: Dental Prosthesis Design, Dental Restoration, Permanent. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 90 Literaturangaben.
Abstract (Originalsprache)
Objectives
To review the factors that impact the accuracy of intraoral scanners (IOSs) when fabricating tooth‐supported restorations. Overview Factors can have a different impact on IOS accuracy depending on the scanning purpose. If the goal is to fabricate tooth‐supported restorations, it is essential to review the following operator‐related factors: IOS technology and system, scan extension and starting quadrant, scanning pattern, scanning distance, and rescanning methods. Additionally, it is critical to interpret the following patient‐related factors differently: edentulous spaces, presence of existing restorations on adjacent teeth, and characteristics of the tooth preparation (build‐up material, geometry, total occlusal convergence [TOC], finish line location, and surface finishing), and interdental spaces (between tooth preparations or between preparation and the adjacent tooth).
Conclusions
For crown or short‐span fixed dental prostheses, a reduced scan extension is recommended. For complete‐arch scans, it is advisable to start the scan in the same quadrant as the preparation. If the IOS permits locking the scan, rescanning may be indicated. Restorations on tooth preparations and adjacent teeth reduce accuracy. The simpler the geometry and the larger the TOC, the higher the IOS accuracy. Intracrevicular finish lines result in lower accuracy than equigingival or supragingival positions. Air‐particle procedures showed better accuracy than coarse and fine grit and immediate dentin sealing. The greater the space between a preparation and the adjacent tooth, the better the accuracy. Clinical Implications Dental professionals must understand and handle the factors that impact the scanning accuracy of intraoral scanners differently depending on the purpose of the scan.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Prosthodontics, School of Dental Medicine, Tufts University, Boston, Massachusetts, USA.
- Department of Restorative Dentistry, School of Dentistry, University of Washington, Seattle, Washington, USA.
- Research and Digital Dentistry, Kois Center, Seattle, Washington, USA.
- Kois Center, Private Practice, Seattle, Washington, USA.
ORCID-Profile: Marta Revilla-León
Zitieren
APA
Revilla-León, M., & Kois, J. C. (2025). Parameters to Improve the Accuracy of Intraoral Scanners for Fabricating Tooth‐Supported Restorations. Journal of Esthetic and Restorative Dentistry, 37(1), 277-287. https://doi.org/10.1111/jerd.13364
Vancouver
Revilla-León M, Kois JC. Parameters to Improve the Accuracy of Intraoral Scanners for Fabricating Tooth‐Supported Restorations. Journal of Esthetic and Restorative Dentistry. 2025;37(1):277-287. doi:10.1111/jerd.13364
BibTeX
@article{RevillaLen2025,
author = {Revilla-León, Marta and Kois, John C},
title = {Parameters to Improve the Accuracy of Intraoral Scanners for Fabricating Tooth‐Supported Restorations},
journal = {Journal of Esthetic and Restorative Dentistry},
year = {2025},
volume = {37},
number = {1},
pages = {277--287},
doi = {10.1111/jerd.13364}
}
EUVIMED