EUVIMEDOntdek EUVIMED
Crossref

Effect of Er: YAG laser on debonding zirconia and lithium disilicate crowns bonded with 2‐ and 1‐bottle adhesive resin cements

Sama Suliman, Taiseer Sulaiman iD, Janina Golob Deeb, Awab Abdulmajeed, Aous Abdulmajeed, Timo Närhi

Journal of Esthetic and Restorative Dentistry · 2024

DOI: 10.1111/jerd.13274 ↗

At a glance

Journal article in Journal of Esthetic and Restorative Dentistry, 2024. Written by Sama Suliman and 5 co-authors. Institution: Department of Prosthetic Dentistry and Stomatognathic Physiology, Institute of Dentistry, University of Turku, Turku, Finland. Major MEDLINE topics: Resin Cements, Zirconium, Dental Porcelain, Crowns. Cited 5 times so far (Crossref); 31 references.

SamenvattingSubjectsBibliografische gegevensCiteRelated studies

Abstract (original language)

Introduction

Erbium‐doped yttrium‐aluminum‐garnet (Er:YAG) laser debonding of zirconia and lithium disilicate restorations is increasingly used for a range of clinical applications. Using rotary instruments to remove such restorations for any purpose has proven to be challenging. Erbium laser has been reported to be a conservative method for removing ceramic restorations. There is little data in the literature about the effect of adhesive resin cement type on the debonding time of the ceramic restoration using the Er:YAG laser.

Objectives

To evaluate and compare the time required for the Er:YAG laser to debond zirconia and lithium disilicate crowns bonded with a 2‐ and 1‐bottle adhesive resin cement systems. Materials and Methods Forty extracted premolar teeth were prepared and scanned for milled 40 CAD/CAM crowns. Teeth were randomly assigned into groups ( n = 10 per group): 3 mol% yttria‐partially stabilized zirconia crowns 3Y‐PSZ (G1a) bonded with Panavia™ V5 (2‐bottle adhesive resin cement), Zirconia 3Y‐PSZ crowns (G1b) bonded with RelyX™ Ultimate (1‐bottle adhesive resin cement), and for the lithium disilicate crowns bonded with the two types of cements (G2a, G2b). Each specimen was irradiated with an Er:YAG laser at 335 mJ, 15 Hz, 5.0 W, and 50‐ms pulse duration (super short pulse mode). The irradiation time required for crowns to be successfully debonded was recorded for each specimen. Data were statistically analyzed using ANOVA and Tukey HSD post‐hoc test ( p < 0.05), at the 95 percent level of confidence. The intaglio surface of the debonded crown was analyzed using scanning electron microscopy (SEM).

Results

The mean ± standard deviation times needed for crown debonding were 5.75 ± 2.00 min for the G1a group, 4.79 ± 1.20 min for group G1b, 1.69 ± 0.49 min for group G2a, and 1.12 ± 0.17 for group G2b. There was no statistically significant difference in debonding time between the 2‐ and 1‐ bottle adhesive resin cement within the groups G1a and b ( p = 0.2914), or between groups G2a b ( p = 0.7116). A statistically significant difference ( p < 0.05) was found between groups G1a and G2a and b and between groups G1b and G2a and b were SEM analysis showed no changes in the microstructure of the ceramic surface after Er:YAG laser irradiation.

Conclusion

Zirconia and lithium disilicate restorations can be debonded using Er:YAG lasers in a safe and efficient manner. There is no significant difference in the debonding time between the 2‐ and 1‐ bottle adhesive resin cement systems used in this study. Clinical Significance Retrieving zirconia and lithium disilicate ceramics can be a challenging process when using diamond rotary instruments. ER:YAG lasers may efficiently debond these ceramics from the tooth structure, independent of the bonding process used for bonding them.

Subjects

MeSH terms (MEDLINE)

Resin CementsZirconiumDental PorcelainCrownsLasers, Solid-StateHumansDental DebondingDental Bonding

Author keywords

CAD/CAMceramicsdental materialsoperative dentistryprosthodontics

Substances

Resin CementsZirconiumlithia disilicateDental Porcelainzirconium oxideAdhesive cement

Authors and institutions

  • Department of Prosthetic Dentistry and Stomatognathic Physiology, Institute of Dentistry, University of Turku, Turku, Finland.
  • Department of Restorative Dentistry, College of Dental Medicine, University of Sharjah, Sharjah, United Arab Emirates.
  • Division of Comprehensive Oral Health, Adams School of Dentistry, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina, USA.
  • Department of Periodontics, School of Dentistry, Virginia Commonwealth University, Richmond, Virginia, USA.
  • Department of General Practice, School of Dentistry, Virginia Commonwealth University, Richmond, Virginia, USA.
  • Wellbeing Services County of Southwest, Turku, Finland.

ORCID profiles: Taiseer Sulaiman

Cite

APA

Suliman, S., Sulaiman, T., Deeb, J. G., Abdulmajeed, A., Abdulmajeed, A., & Närhi, T. (2024). Effect of Er: YAG laser on debonding zirconia and lithium disilicate crowns bonded with 2‐ and 1‐bottle adhesive resin cements. Journal of Esthetic and Restorative Dentistry. https://doi.org/10.1111/jerd.13274

Vancouver

Suliman S, Sulaiman T, Deeb JG, Abdulmajeed A, Abdulmajeed A, Närhi T. Effect of Er: YAG laser on debonding zirconia and lithium disilicate crowns bonded with 2‐ and 1‐bottle adhesive resin cements. Journal of Esthetic and Restorative Dentistry. 2024. doi:10.1111/jerd.13274

BibTeX
@article{Suliman2024,
  author = {Suliman, Sama and Sulaiman, Taiseer and Deeb, Janina Golob and Abdulmajeed, Awab and Abdulmajeed, Aous and Närhi, Timo},
  title = {Effect of Er: YAG laser on debonding zirconia and lithium disilicate crowns bonded with 2‐ and 1‐bottle adhesive resin cements},
  journal = {Journal of Esthetic and Restorative Dentistry},
  year = {2024},
  doi = {10.1111/jerd.13274}
}
Start for free →