EUVIMEDObjevte EUVIMED
Crossref

Compressive modulus, translucency, and irradiance transmittance of clear PVS materials used for resin injection molding technique

Nadia Machado, Mateus G Rocha iD, Dayane Oliveira iD, Kevin G Reardon, Emerson Martins, Nathaniel C Lawson iD

Journal of Esthetic and Restorative Dentistry · 2025-02 · 37 (2) · 412-422

DOI: 10.1111/jerd.13270 ↗

At a glance

Journal article in Journal of Esthetic and Restorative Dentistry, published online on 2024-05-30. Written by Nadia Machado and 5 co-authors. Institution: Division of Biomaterials, UAB School of Dentistry, Birmingham, Alabama, USA. Major MEDLINE topics: Siloxanes, Polyvinyls, Dental Impression Materials. Cited 6 times so far (Crossref); 40 references.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

Objectives

To evaluate the compressive modulus, translucency, and light curing irradiance transmittance of four clear polyvinyl siloxane (PVS) materials used for the injection molding technique at varying thicknesses, and to assess the correlation between color parameters and irradiance transmittance. Materials and Methods Four clear PVS materials (Exaclear, Clear Bite Matrix, Affinity Crystal, and Memosil 2) were used in this study. Compressive modulus was measured by compressing cylindrical PVS specimens ( n = 9; d = 10 mm; t = 6 mm) up to 30% strain using a universal testing machine. For the translucency analysis and irradiance transmittance, specimens ( n = 5) were fabricated with five different thicknesses ( d = 12 mm and t = 2, 4, 6, 8 and 10 mm). The L*, a, *b* values of specimens were obtained using a CIELab spectrophotometer (CMD‐700, Konica Minolta) with calibrated white and black tiles; the translucency parameter was calculated. The same specimens were placed onto a spectrophotometer (MARC Light Collector) to measure irradiance transmitted through the specimens from a light curing unit (Valo Corded, Ultradent). Data were analyzed using analysis of variance (ANOVA) with Tukey post hoc test and the correlation between translucency and irradiance transmittance of materials for each thickness was evaluated using Pearson's correlation.

Results

Compressive modulus differences in PVS materials were significant (one‐way ANOVA: df = 3, F = 76.27, p < 0.001); Affinity and Memosil 2 were highest with no significant difference between them (Tukey: t = −1.62; p = 0.382). Clear Bite was higher than Exaclear (Tukey: t = −3.70; p = 0.004). Exaclear was lowest. Translucency decreased with thickness (Two‐way ANOVA: df = 3, F = 586.53, p < 0.001; thickness: df = 4, F = 1389.34, p < 0.001). Exaclear was most translucent at all thicknesses. L*, a*, b* values varied by material and thickness (L*: df = 3, F = 1213.32, p < 0.001; a*: df = 3, F = 10766.8, p < 0.001; b*: df = 3, F = 3260.42, p < 0.001). Memosil 2 had lowest b* values. Irradiance transmittance was affected by material and thickness (Two‐way ANOVA: df = 4, F = 2388.86, p < 0.001). Exaclear had highest irradiance transmission, surpassing control at >6 mm. Violet/blue irradiance ratio decreased with thickness; Exaclear maintained a constant ratio, indicating preserved violet irradiance. There was a strong positive correlation between translucency and light irradiance (Pearson's r = 0.97, R 2 = 0.86–0.96). Radiant exposure analysis suggests adjusting the curing time based on PVS thickness for optimal exposure (10 J/cm 2 ) is achievable within 13–14 s for

Subjects

MeSH terms (MEDLINE)

SiloxanesPolyvinylsDental Impression MaterialsMaterials TestingColorHumansSpectrophotometryLight

Author keywords

clear impression materialcuring lightinjection moldinglight irradiancestamp technique

Substances

SiloxanesPolyvinylsvinyl polysiloxaneDental Impression Materials

Authors and institutions

  • Division of Biomaterials, UAB School of Dentistry, Birmingham, Alabama, USA.
  • Center for Dental Biomaterials, College of Dentistry, University of Florida, Gainesville, Florida, USA.
  • Private Practice, Elmhurst, Illinois, USA.
  • Division of General Dental Sciences, UAB School of Dentistry, Birmingham, Alabama, USA.

ORCID profiles: Mateus G Rocha, Dayane Oliveira, Nathaniel C Lawson

Cite

APA

Machado, N., Rocha, M. G., Oliveira, D., Reardon, K. G., Martins, E., & Lawson, N. C. (2025). Compressive modulus, translucency, and irradiance transmittance of clear PVS materials used for resin injection molding technique. Journal of Esthetic and Restorative Dentistry, 37(2), 412-422. https://doi.org/10.1111/jerd.13270

Vancouver

Machado N, Rocha MG, Oliveira D, Reardon KG, Martins E, Lawson NC. Compressive modulus, translucency, and irradiance transmittance of clear PVS materials used for resin injection molding technique. Journal of Esthetic and Restorative Dentistry. 2025;37(2):412-422. doi:10.1111/jerd.13270

BibTeX
@article{Machado2025,
  author = {Machado, Nadia and Rocha, Mateus G and Oliveira, Dayane and Reardon, Kevin G and Martins, Emerson and Lawson, Nathaniel C},
  title = {Compressive modulus, translucency, and irradiance transmittance of clear PVS materials used for resin injection molding technique},
  journal = {Journal of Esthetic and Restorative Dentistry},
  year = {2025},
  volume = {37},
  number = {2},
  pages = {412--422},
  doi = {10.1111/jerd.13270}
}
Start for free →