EUVIMEDAvasta EUVIMED
Crossref

Translucent monolithic zirconia titanium‐supported FP1 full‐arch prosthesis: A novel proof of concept to address esthetic, functional, and biologic challenges

Stavros Pelekanos, Panagiotis Ntovas iD, Vasiliki Rizou, Alessandro Pozzi iD

Journal of Esthetic and Restorative Dentistry · 2024-01 · 36 (1) · 197-206

DOI: 10.1111/jerd.13167 ↗

At a glance

Journal article in Journal of Esthetic and Restorative Dentistry, published online on 2023-11-17. Written by Stavros Pelekanos and 3 co-authors. Institution: Private practice AthenaSmile, Athens, Greece. Major MEDLINE topics: Dental Implants, Biological Products. Cited 17 times so far (Crossref); 41 references.

AbstraktSubjectsBibliograafilised andmedCiteRelated studies

Abstract (original language)

Objective

Despite the wide clinical use of translucent zirconia for full‐arch implant prostheses, reduced flexural strength and fracture toughness compared with high‐strength opaque zirconia needs to be addressed. A novel proof of concept for FP1 full‐arch prosthesis featured by translucent monolithic zirconia and titanium framework was presented. Clinical Considerations Computer‐guided implant planning and surgery were executed and digitally designed FP1 temporary prosthesis prefabricated. Implant and prosthetic placement were achieved with a set of three‐dimensional (3D)‐printed templates. Implants were immediately loaded. After 4 months intraoral optical scan was taken to record implant coordinates, soft tissue anatomy, and temporary FP1 prosthesis. A novel digital workflow was used to design and mill overlaying translucent zirconia and anatomically shaped titanium framework with a scalloped soft‐tissue interface. Final FP1 prosthesis was assembled cementing zirconia jacket on titanium counterpart.

Conclusions

Translucent zirconia supported by titanium framework can address esthetic and mechanical requirements of FP1 full‐arch prosthesis, minimizing risk of fracture and providing a rigid and passive joint with supporting implants. The smooth and highly polished titanium surface with an anatomic design, tightly matching scalloped soft tissue interface, can limit food impaction, air and saliva leakage and contribute to overall biologic integration of FP1 full‐arch prosthesis. Clinical Significance Translucent monolithic zirconia featured with anatomically shaped titanium framework with scalloped transmucosal part, combining a pleasant esthetic outcome with increased flexural strength and fracture toughness, may be indicated to increase the clinical performance of FP1 full‐arch prosthesis.

Subjects

MeSH terms (MEDLINE)

Dental ImplantsBiological ProductsTitaniumComputer-Aided DesignDental Prosthesis, Implant-SupportedEsthetics, DentalZirconium

Author keywords

FP1dental implantdigital workflowfull-archimmediate loadingtitanium frameworkzirconia

Substances

Titaniumzirconium oxideDental ImplantsZirconiumBiological Products

Authors and institutions

  • Private practice AthenaSmile, Athens, Greece.
  • Department of Prosthodontics, Tufts University, School of Dental Medicine, Boston, Massachusetts, USA.
  • Department of Clinical Science and Translational Medicine, University of Rome Tor Vergata, Rome, Italy.
  • Department of Restorative, Sciences Augusta University, Augusta, Georgia, USA.
  • Department of Restorative Dentistry and Biomaterials Sciences, Harvard School of Dental Medicine, Boston, Massachusetts, USA.

ORCID profiles: Panagiotis Ntovas, Alessandro Pozzi

Cite

APA

Pelekanos, S., Ntovas, P., Rizou, V., & Pozzi, A. (2024). Translucent monolithic zirconia titanium‐supported FP1 full‐arch prosthesis: A novel proof of concept to address esthetic, functional, and biologic challenges. Journal of Esthetic and Restorative Dentistry, 36(1), 197-206. https://doi.org/10.1111/jerd.13167

Vancouver

Pelekanos S, Ntovas P, Rizou V, Pozzi A. Translucent monolithic zirconia titanium‐supported FP1 full‐arch prosthesis: A novel proof of concept to address esthetic, functional, and biologic challenges. Journal of Esthetic and Restorative Dentistry. 2024;36(1):197-206. doi:10.1111/jerd.13167

BibTeX
@article{Pelekanos2024,
  author = {Pelekanos, Stavros and Ntovas, Panagiotis and Rizou, Vasiliki and Pozzi, Alessandro},
  title = {Translucent monolithic zirconia titanium‐supported FP1 full‐arch prosthesis: A novel proof of concept to address esthetic, functional, and biologic challenges},
  journal = {Journal of Esthetic and Restorative Dentistry},
  year = {2024},
  volume = {36},
  number = {1},
  pages = {197--206},
  doi = {10.1111/jerd.13167}
}
Start for free →