Low‐Temperature Densification of SiC Ceramics With Robust Mechanical Properties Using Si–B 4 C Additive
Journal of the American Ceramic Society · 2026-11 · 109 (11)
DOI: 10.1111/jace.71422 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 10.11.2026. Verfasst von Bohan Wang und 4 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
The strong covalent bonding of SiC makes its densification difficult, typically requiring high sintering temperatures. Reaction sintering provides an effective approach to lowering the fabrication temperature of SiC ceramics. In this study, an Si–B 4 C reactive sintering strategy was developed for the low‐temperature densification of SiC ceramics by spark plasma sintering. The effects of the Si–B 4 C additive on the phase evolution, microstructure, and mechanical properties of SiC ceramics were systematically investigated. The role of the Si–B 4 C additive in promoting the low‐temperature densification of SiC ceramics was also elucidated. At a fixed total additive content of 15 wt%, partial replacement of Si with B 4 C substantially accelerated the densification of SiC ceramics during sintering. The average densification rate of the Si–B 4 C additive was substantially higher than that of the Si‐only additive. A nearly dense SiC ceramic was obtained by sintering at 1450°C for 10 min using the Si–B 4 C reactive sintering additive. The low‐temperature densification was attributed to the combined effects of liquid Si and the reaction between Si and B 4 C to form secondary SiC. After sintering at 1500°C for 5 min, SiC ceramics with the Si–B 4 C additive exhibited a Vickers hardness of 29.0 GPa, Young's modulus of 382 GPa, and a fracture toughness of 2.9 MPa m 1/2 . These results demonstrate that Si–B 4 C reactive sintering strategy enables low‐temperature densification of SiC ceramics while retaining robust mechanical properties.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Wang, B., Zhao, D., Ge, Y., Chen, K., & Liu, G. (2026). Low‐Temperature Densification of SiC Ceramics With Robust Mechanical Properties Using Si–B 4 C Additive. Journal of the American Ceramic Society, 109(11). https://doi.org/10.1111/jace.71422
Vancouver
Wang B, Zhao D, Ge Y, Chen K, Liu G. Low‐Temperature Densification of SiC Ceramics With Robust Mechanical Properties Using Si–B 4 C Additive. Journal of the American Ceramic Society. 2026;109(11). doi:10.1111/jace.71422
BibTeX
@article{Wang2026,
author = {Wang, Bohan and Zhao, Dengke and Ge, Yiyao and Chen, Kexin and Liu, Guanghua},
title = {Low‐Temperature Densification of SiC Ceramics With Robust Mechanical Properties Using Si–B 4 C Additive},
journal = {Journal of the American Ceramic Society},
year = {2026},
volume = {109},
number = {11},
doi = {10.1111/jace.71422}
}
EUVIMED