EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A re‐usable 3D ‐printed training model for the endodontic management of dental trauma in immature teeth

Eva Maier iD, Jan Zentgraf iD, Eveline Angele, José Zorzin iD, Michael Taschner, Matthias Widbiller iD, Kerstin Galler, Thomas Schratzenstaller

International Endodontic Journal · 2026

DOI: 10.1111/iej.14235 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Endodontic Journal, 2026. Verfasst von Eva Maier und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Operative Dentistry and Periodontology, University Hospital Erlangen, Erlangen, Germany. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Tooth Injuries, Endodontics, Models, Dental. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Interdisciplinary Center for Clinical Research (IZKF) at the University Hospital Erlangen of the Friedrich-Alexander University Erlangen-Nuremberg, This research was funded by Regensburg Center of Health Sciences and Technology (RCHST) and Regensburg Center of Biomedical Engineering (RCBE).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aim

To develop a 3D‐printed model enabling treatment simulation of trauma‐related endodontic and restorative procedures like revitalization or placement of an apical plug on teeth with incomplete root formation. Methodology To generate a realistic training model suitable for trauma‐related simulations, CT‐Data sets were segmented, combined, adjusted and optimized using computer‐aided design features. Specific focus was on optimally reflecting characteristics of immature teeth like open apical foramina and thin root walls. For reflection of the revitalization process, a set‐up including a tube filled with red liquid under pressure was developed to be perforated during the procedure by the trainee, simulating bleeding from the apical papilla into the root canal system. Design was based on a combination of cost‐effective simple parts combined with 3D‐printed components to achieve maximal accessibility, exchangeability and re‐usability. Model assembly and preparation were described in step‐by‐step instructions.

Results

As a result of the developmental process, the presented model qualifies for the training of the endodontic management of complications on immature teeth after dental trauma. Step‐by‐step descriptions aligned with the clinical procedures are performable for a revitalization procedure, for pulpotomy followed by fragment re‐attachment and splint application and for placement of an apical plug using hydraulic calcium silicate cements.

Conclusions

The model successfully achieved its intended objectives, so that it may be used in the future in various dental trauma treatment simulations for undergraduate and postgraduate education on the endodontic management of trauma‐related therapies in immature teeth. Its common manufacturing process, affordability and re‐usability support accessibility and sustainability.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalTooth InjuriesEndodonticsModels, DentalModels, AnatomicRoot Canal TherapyHumans

Stichwörter der Autor:innen

3D‐printingdental educationdental traumatologyimmature teethrevitalizationtraining model

Autor:innen und Institutionen

  • Department of Operative Dentistry and Periodontology, University Hospital Erlangen, Erlangen, Germany.
  • Laboratory for Medical Devices, Department of Mechanical Engineering, University of Applied Sciences Regensburg, Regensburg, Germany.
  • Regensburg Center of Health Sciences and Technology (RCHST), University of Applied Sciences Regensburg, Regensburg, Germany.
  • Regensburg Center of Biomedical Engineering (RCBE), University of Applied Sciences Regensburg, Regensburg, Germany.
  • Department of Conservative Dentistry and Periodontology, University Hospital Regensburg, Regensburg, Germany.

ORCID-Profile: Eva Maier, Jan Zentgraf, José Zorzin, Matthias Widbiller

Förderung

  • Interdisciplinary Center for Clinical Research (IZKF) at the University Hospital Erlangen of the Friedrich-Alexander University Erlangen-Nuremberg
  • This research was funded by Regensburg Center of Health Sciences and Technology (RCHST) and Regensburg Center of Biomedical Engineering (RCBE)

Zitieren

APA

Maier, E., Zentgraf, J., Angele, E., Zorzin, J., Taschner, M., Widbiller, M., Galler, K., & Schratzenstaller, T. (2026). A re‐usable 3D ‐printed training model for the endodontic management of dental trauma in immature teeth. International Endodontic Journal. https://doi.org/10.1111/iej.14235

Vancouver

Maier E, Zentgraf J, Angele E, Zorzin J, Taschner M, Widbiller M, et al. A re‐usable 3D ‐printed training model for the endodontic management of dental trauma in immature teeth. International Endodontic Journal. 2026. doi:10.1111/iej.14235

BibTeX
@article{Maier2026,
  author = {Maier, Eva and Zentgraf, Jan and Angele, Eveline and Zorzin, José and Taschner, Michael and Widbiller, Matthias and Galler, Kerstin and Schratzenstaller, Thomas},
  title = {A re‐usable 3D ‐printed training model for the endodontic management of dental trauma in immature teeth},
  journal = {International Endodontic Journal},
  year = {2026},
  doi = {10.1111/iej.14235}
}
Kostenlos starten →