EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative analysis of reciprocating and flat‐side heat‐treated rotary single‐file systems: Design, metallurgical characteristics, and mechanical performance

Jorge N R Martins iD, Emmanuel J N L Silva iD, Abayomi O Baruwa iD, Rui Pereira da Costa, Francisco M Braz Fernandes, Marco A Versiani iD

International Endodontic Journal · 2023

DOI: 10.1111/iej.13920 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Endodontic Journal, 2023. Verfasst von Jorge N R Martins und 5 weiteren Autor:innen. Beteiligte Einrichtung: Faculdade de Medicina Dentária, Universidade de Lisboa, Lisbon, Portugal. Hauptthemen laut MEDLINE: Hot Temperature, Dental Instruments. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e a Tecnologia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aim

To compare two flat‐side single‐file rotary instruments with three single‐file reciprocating systems through a multimethod assessment. Methodology A total of 290 new NiTi single‐file rotary (AF F One Blue 25/0.06 and Platinum V.EU 25/0.06) and reciprocating (One Files Blue R25, Reciproc Blue R25, Reciproc R25) instruments were selected, carefully examined for any major deformations, and evaluated regarding their macroscopic and microscopic design, nickel and titanium elements ratio, phase transformation temperatures, and mechanical performance (time/rotation to fracture, maximum torque, angle of rotation, microhardness, maximum bending, and buckling strengths). One‐way anova post hoc Tukey, T ‐test, and nonparametric Mood's median tests were used for statistical comparisons (α = 5%).

Results

Tested instruments had identical blade counts and near‐identical helical angles of approximately 24° (rotary instruments) and 151° (reciprocating instruments). The flat‐side analysis revealed a few inconsistencies, such as discontinuity segments, different orientations, and gaps in the homogeneity of the bluish colour. Microscopically, flat‐side instruments exhibited blade discontinuity and an incomplete S‐shaped cross‐section. The surface finish was smoother for One Files Blue and more irregular for both rotary instruments. There were distinct phase transformation temperatures amongst all instruments. All heat‐treated instruments were in R‐phase arrangement, and Reciproc was in R‐phase plus austenite at test temperature (20°C). Compared with the reciprocating instruments, both flat‐side instruments exhibited lower results in the cyclic fatigue tests using two different clockwise kinematics, maximum torque, angle of rotation, and maximum buckling strength ( p < .05). The rotary systems also exhibited low flexibility ( p < .05). AF F One Blue had the lowest microhardness, whilst Reciproc had the highest value.

Conclusion

This multimethod investigation revealed that the flat‐side rotary instruments underperformed the reciprocating instruments regarding cyclic fatigue (with two different clockwise kinematics), maximum torque, angle of rotation, maximum buckling strength, and flexibility. Manufacturing inconsistencies were also observed in some of the flat‐side instruments, including discontinuity segments, different orientations, and in the homogeneity of their bluish colour given by the heat treatment.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Hot TemperatureDental InstrumentsEquipment DesignRoot Canal PreparationMaterials TestingTitaniumStress, Mechanical

Stichwörter der Autor:innen

cyclic fatigueendodonticsreciprocationroot canal treatmentsingle-file rotary systemtorsional strength

Substanzen

Titanium

Autor:innen und Institutionen

  • Faculdade de Medicina Dentária, Universidade de Lisboa, Lisbon, Portugal.
  • Grupo de Investigação em Bioquimica e Biologia Oral, Unidade de Investigação em Ciências Orais e Biomédicas (UICOB), Faculdade de Medicina Dentária, Universidade de Lisboa, Lisbon, Portugal.
  • Centro de Estudo de Medicina Dentária Baseada na Evidência (CEMDBE) - Cochrane Portugal, Faculdade de Medicina Dentária, Universidade de Lisboa, Lisbon, Portugal.
  • School of Dentistry, Grande Rio University (UNIGRANRIO), Rio de Janeiro, Brazil.
  • Fluminense Federal University (UFF), Niterói, Rio de Janeiro, Brazil.
  • CENIMAT/I3N, Department of Materials Science, NOVA School of Science and Technology, Universidade NOVA de Lisboa, Caparica, Portugal.

ORCID-Profile: Jorge N R Martins, Emmanuel J N L Silva, Abayomi O Baruwa, Marco A Versiani

Förderung

  • Fundação para a Ciência e a Tecnologia

Zitieren

APA

Martins, J. N. R., Silva, E. J. N. L., Baruwa, A. O., Pereira da Costa, R., Braz Fernandes, F. M., & Versiani, M. A. (2023). Comparative analysis of reciprocating and flat‐side heat‐treated rotary single‐file systems: Design, metallurgical characteristics, and mechanical performance. International Endodontic Journal. https://doi.org/10.1111/iej.13920

Vancouver

Martins JNR, Silva EJNL, Baruwa AO, Pereira da Costa R, Braz Fernandes FM, Versiani MA. Comparative analysis of reciprocating and flat‐side heat‐treated rotary single‐file systems: Design, metallurgical characteristics, and mechanical performance. International Endodontic Journal. 2023. doi:10.1111/iej.13920

BibTeX
@article{Martins2023,
  author = {Martins, Jorge N R and Silva, Emmanuel J N L and Baruwa, Abayomi O and Pereira da Costa, Rui and Braz Fernandes, Francisco M and Versiani, Marco A},
  title = {Comparative analysis of reciprocating and flat‐side heat‐treated rotary single‐file systems: Design, metallurgical characteristics, and mechanical performance},
  journal = {International Endodontic Journal},
  year = {2023},
  doi = {10.1111/iej.13920}
}
Kostenlos starten →