EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Differentiating Test Frequency and Self‐Heating Effects on the Fatigue Behavior of Normalized SAE 1045 Steel by In Situ Multisensor Monitoring

Jonas Anton Ziman, Fabian Weber, Janina Koziol, Luca Alexander Koch, Frank Walther, Peter Starke

Fatigue & Fracture of Engineering Materials & Structures · 08.11.2026

DOI: 10.1111/ffe.70525 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fatigue & Fracture of Engineering Materials & Structures, online erschienen am 08.11.2026. Verfasst von Jonas Anton Ziman und 5 weiteren Autor:innen. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this research, the fatigue behavior of a normalized SAE 1045 (C45E, 1.1191) steel was investigated at test frequencies between 5 and 260 Hz. The focus was on differentiating between frequency‐induced lifetime extension and lifetime‐reducing self‐heating phenomena. Load increase tests and constant amplitude tests were performed to characterize the cyclic deformation behavior, whereas the material response was continuously monitored using Internal Energy Tracing Sensors, which use nondestructively measured signals to assess material degradation processes. In addition, a phase‐specific temperature‐correction of the electrical resistance is proposed to distinguish between microstructural and thermal contributions during cyclic loading. The results show no discernible frequency effect on fatigue life within the range of 80–150 Hz, whereas a pronounced influence is observed between 5 and 260 Hz. These findings contribute to the understanding of frequency‐temperature interactions in fatigue and improve the understanding of thermally activated degradation mechanisms at higher test frequencies.

Förderung

  • Deutsche Forschungsgemeinschaft

Zitieren

APA

Ziman, J. A., Weber, F., Koziol, J., Koch, L. A., Walther, F., & Starke, P. (2026). Differentiating Test Frequency and Self‐Heating Effects on the Fatigue Behavior of Normalized SAE 1045 Steel by In Situ Multisensor Monitoring. Fatigue & Fracture of Engineering Materials & Structures. https://doi.org/10.1111/ffe.70525

Vancouver

Ziman JA, Weber F, Koziol J, Koch LA, Walther F, Starke P. Differentiating Test Frequency and Self‐Heating Effects on the Fatigue Behavior of Normalized SAE 1045 Steel by In Situ Multisensor Monitoring. Fatigue & Fracture of Engineering Materials & Structures. 2026. doi:10.1111/ffe.70525

BibTeX
@article{Ziman2026,
  author = {Ziman, Jonas Anton and Weber, Fabian and Koziol, Janina and Koch, Luca Alexander and Walther, Frank and Starke, Peter},
  title = {Differentiating Test Frequency and Self‐Heating Effects on the Fatigue Behavior of Normalized SAE 1045 Steel by In Situ Multisensor Monitoring},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2026},
  doi = {10.1111/ffe.70525}
}
Kostenlos starten →