EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Frequency Effects on Fatigue Life at High Test Frequencies for SAE 1045 Steel Based on Thermography and Electrical Resistance Measurements

Jonas Anton Ziman, Fabian Weber, Janina Koziol, Johannes Leon Otto, Lukas Maximilian Sauer, Frank Walther, Peter Starke

Applied Sciences · 21.01.2025 · 15 (3) · 1022

DOI: 10.3390/app15031022 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 21.01.2025. Verfasst von Jonas Anton Ziman und 6 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Research Foundation (Deutsche Forschungsgemeinschaft DFG).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research provides a method for a reliable fatigue life estimation at high testing frequencies. The investigations are based on the lifetime prediction method StressLifeHCF considering test frequencies of 80 and 260 Hz for normalized SAE 1045 (C45E, 1.1191) steel. Therefore, load increase tests and constant amplitude tests were carried out using a resonant testing rig. To ensure a mechanism-oriented lifetime prediction, the material response to dynamic loading is monitored via temperature and electrical resistance measurements. Due to the higher energy input per time unit, when the test frequency is increased, the heat dissipation also increases. For this reason, a precise differentiation between frequency- and temperature-related effects for adequate fatigue assessment is challenging. To evaluate the temperature’s influence on electrical resistance, an electrical resistance-temperature hysteresis is measured, and the frequency influence is analyzed by considering cyclic deformation curves. In addition to an extension of the fatigue life due to an increased test frequency, the lifetime prediction method was validated for high frequencies. The generated S-N curves show a reliable agreement with the data points from conventional constant amplitude tests. In this context, the temperature correction of the electrical resistance proved to be an important input variable for a reliable lifetime prediction.

Förderung

  • German Research Foundation (Deutsche Forschungsgemeinschaft DFG)

Zitieren

APA

Ziman, J. A., Weber, F., Koziol, J., Otto, J. L., Sauer, L. M., Walther, F., & Starke, P. (2025). Evaluation of Frequency Effects on Fatigue Life at High Test Frequencies for SAE 1045 Steel Based on Thermography and Electrical Resistance Measurements. Applied Sciences, 15(3), 1022. https://doi.org/10.3390/app15031022

Vancouver

Ziman JA, Weber F, Koziol J, Otto JL, Sauer LM, Walther F, et al. Evaluation of Frequency Effects on Fatigue Life at High Test Frequencies for SAE 1045 Steel Based on Thermography and Electrical Resistance Measurements. Applied Sciences. 2025;15(3):1022. doi:10.3390/app15031022

BibTeX
@article{Ziman2025,
  author = {Ziman, Jonas Anton and Weber, Fabian and Koziol, Janina and Otto, Johannes Leon and Sauer, Lukas Maximilian and Walther, Frank and Starke, Peter},
  title = {Evaluation of Frequency Effects on Fatigue Life at High Test Frequencies for SAE 1045 Steel Based on Thermography and Electrical Resistance Measurements},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {3},
  pages = {1022},
  doi = {10.3390/app15031022}
}
Kostenlos starten →