EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Investigations on Fatigue Life of Ball Pin After Laser Shock Peening

Jan Kaufman, Miloš Křivan, Martin Petrenec, Libor Mrňa, Sunil Pathak, Jan Šmaus, Jan Brajer, Tomáš Mocek

Fatigue & Fracture of Engineering Materials & Structures · 2025-04 · 48 (4) · 1758-1767

DOI: 10.1111/ffe.14588 ↗

At a glance

Journal article in Fatigue & Fracture of Engineering Materials & Structures, published online on 2025-01-29. Written by Jan Kaufman and 7 co-authors. Cited 3 times so far (Crossref); 19 references. The full text is freely available (open access, CC BY 4.0). Funded by: Ministerstvo Školství, Mládeže a Tělovýchovy.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

In the present work, laser shock peening (LSP) was applied on critical areas of ball pins made of 41CrS4 steel to extend their fatigue life. The treatment introduced compressive residual stresses up to a depth of 1 mm with maximum value of −592 MPa on the ball pin surface. This led to a suppression of fretting fatigue in the conical section of the ball pin under lower stress amplitudes and overall fatigue life improvement by a factor of 2.4. After LSP, the crack propagation speed was slowed down to 0.001 μm/cycle down from 0.1 μm/cycle. At high stress amplitudes, the location of the main fatigue crack shifted into a notched part of the ball pin. The combined effect of high stress amplitude and stress concentration changed the elastic strain dominated high cycle fatigue to plastic strain dominated low cycle fatigue where the LSP treatment had no significant impact on the fatigue life.

Funding

  • Ministerstvo Školství, Mládeže a Tělovýchovy

Cite

APA

Kaufman, J., Křivan, M., Petrenec, M., Mrňa, L., Pathak, S., Šmaus, J., Brajer, J., & Mocek, T. (2025). Investigations on Fatigue Life of Ball Pin After Laser Shock Peening. Fatigue & Fracture of Engineering Materials & Structures, 48(4), 1758-1767. https://doi.org/10.1111/ffe.14588

Vancouver

Kaufman J, Křivan M, Petrenec M, Mrňa L, Pathak S, Šmaus J, et al. Investigations on Fatigue Life of Ball Pin After Laser Shock Peening. Fatigue & Fracture of Engineering Materials & Structures. 2025;48(4):1758-1767. doi:10.1111/ffe.14588

BibTeX
@article{Kaufman2025,
  author = {Kaufman, Jan and Křivan, Miloš and Petrenec, Martin and Mrňa, Libor and Pathak, Sunil and Šmaus, Jan and Brajer, Jan and Mocek, Tomáš},
  title = {Investigations on Fatigue Life of Ball Pin After Laser Shock Peening},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2025},
  volume = {48},
  number = {4},
  pages = {1758--1767},
  doi = {10.1111/ffe.14588}
}
Start for free →