EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Laser Shock Peening on the Fatigue Life of 1Cr12Ni3Mo2VN Steel for Steam Turbine Blades

Zhuolin Tang, Jiashun Gao, Zhilong Xu, Bicheng Guo, Qingshan Jiang, Xiuyu Chen, Jianchun Weng, Bo Li, Junying Chen, Zhenye Zhao

Coatings · 30.08.2023 · 13 (9) · 1524

DOI: 10.3390/coatings13091524 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 30.08.2023. Verfasst von Zhuolin Tang und 9 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Fujian, China, Scientific research project of Fujian Provincial Department of Finance, China, Major Science and Technology Project of Xiamen, Fujian, China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present study, laser shock peening (LSP) was employed to enhance the rotating bending fatigue life of 1Cr12Ni3Mo2VN martensitic stainless steel used in steam turbine blades, addressing the issue of insufficient fatigue performance in these components. The aim of this study was to investigate the effect of LSP on the microhardness, residual stress, and rotating bending fatigue life of 1Cr12Ni3Mo2VN steel samples. The microhardness of LSP-treated samples was increased by 10.5% (LSP-3J sample) and 15.3% (LSP-4J sample), respectively, compared to high-frequency hardening samples. The residual compressive stress of the LSP-4J sample was the largest, reaching −689 MPa, and the affected layer depth was about 800 μm. Fatigue tests showed that the number of cycles at the fracture point for the LSP-3J and LSP-4J samples increased by 163% and 233%, respectively. The fatigue fracture morphology of the four samples showed that the microhardness and residual compressive stress distribution introduced by LSP could effectively inhibit the initiation of surface cracks, slow down the crack growth rate, and improve the rotating bending fatigue life of 1Cr12Ni3Mo2VN.

Förderung

  • Natural Science Foundation of Fujian, China
  • Scientific research project of Fujian Provincial Department of Finance, China
  • Major Science and Technology Project of Xiamen, Fujian, China

Zitieren

APA

Tang, Z., Gao, J., Xu, Z., Guo, B., Jiang, Q., Chen, X., Weng, J., Li, B., Chen, J., & Zhao, Z. (2023). Effect of Laser Shock Peening on the Fatigue Life of 1Cr12Ni3Mo2VN Steel for Steam Turbine Blades. Coatings, 13(9), 1524. https://doi.org/10.3390/coatings13091524

Vancouver

Tang Z, Gao J, Xu Z, Guo B, Jiang Q, Chen X, et al. Effect of Laser Shock Peening on the Fatigue Life of 1Cr12Ni3Mo2VN Steel for Steam Turbine Blades. Coatings. 2023;13(9):1524. doi:10.3390/coatings13091524

BibTeX
@article{Tang2023,
  author = {Tang, Zhuolin and Gao, Jiashun and Xu, Zhilong and Guo, Bicheng and Jiang, Qingshan and Chen, Xiuyu and Weng, Jianchun and Li, Bo and Chen, Junying and Zhao, Zhenye},
  title = {Effect of Laser Shock Peening on the Fatigue Life of 1Cr12Ni3Mo2VN Steel for Steam Turbine Blades},
  journal = {Coatings},
  year = {2023},
  volume = {13},
  number = {9},
  pages = {1524},
  doi = {10.3390/coatings13091524}
}
Kostenlos starten →