EUVIMEDDescubrir EUVIMED
Crossref

Review on the Fatigue Strength of Additively Manufactured Metal Materials Under the Very High Cycle Fatigue

J. Henrique Lopes, Pedro R. da Costa, Manuel Freitas, Luís Reis

Fatigue & Fracture of Engineering Materials & Structures · 2025-03 · 48 (3) · 979-1000

DOI: 10.1111/ffe.14532 ↗

At a glance

Journal article in Fatigue & Fracture of Engineering Materials & Structures, published online on 2024-12-07. Written by J. Henrique Lopes and 3 co-authors. Cited 13 times so far (Crossref); 114 references. Funded by: Fundação para a Ciência e a Tecnologia.

ResumenDatos bibliográficosCiteRelated studies

Abstract (original language)

The primary goal of this systematic literature review is to identify, characterize, and make a comprehensive analysis of the available research on the fatigue strength of additively manufactured (AMed) metal materials when subjected to loading cycles that exceed the preconceptualized fatigue limit ( cycles) and the very high cycle fatigue (VHCF) regime. Considering the inherent complexity and magnitude of influential variables present in AM metal processes, this paper explores in‐depth the relevant conclusions taken by theoretical/experimental studies and their respective results of several AMed materials in the VHCF regime. The present review focuses on key research topics of metal AM fatigue strength, such as crack initiation and failure mechanisms, examining the influence of microstructure and defects, the effect of the input process parameters, postprocessing methods, and the influence of testing conditions on fatigue strength.

Funding

  • Fundação para a Ciência e a Tecnologia

Cite

APA

Lopes, J. H., Costa, P. R. D., Freitas, M., & Reis, L. (2025). Review on the Fatigue Strength of Additively Manufactured Metal Materials Under the Very High Cycle Fatigue. Fatigue & Fracture of Engineering Materials & Structures, 48(3), 979-1000. https://doi.org/10.1111/ffe.14532

Vancouver

Lopes JH, Costa PRD, Freitas M, Reis L. Review on the Fatigue Strength of Additively Manufactured Metal Materials Under the Very High Cycle Fatigue. Fatigue & Fracture of Engineering Materials & Structures. 2025;48(3):979-1000. doi:10.1111/ffe.14532

BibTeX
@article{Lopes2025,
  author = {Lopes, J. Henrique and Costa, Pedro R. da and Freitas, Manuel and Reis, Luís},
  title = {Review on the Fatigue Strength of Additively Manufactured Metal Materials Under the Very High Cycle Fatigue},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2025},
  volume = {48},
  number = {3},
  pages = {979--1000},
  doi = {10.1111/ffe.14532}
}
Start for free →