EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure Study on Very High Cycle Fatigue of an Additively Manufactured Aluminium Alloy via Advanced Characterization Methods

Lu Liu, Shengnan Wang, Gang Li, Yifan Ma

Applied Sciences · 29.02.2024 · 14 (5) · 2025

DOI: 10.3390/app14052025 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 29.02.2024. Verfasst von Lu Liu und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Xi’an Aeronautical University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The engineering application of additively manufactured (AM) metallic materials is quite limited by their fatigue behaviors, which are very inconsistent with that of conventionally wrought or cast ones. Here, based on advanced material characterization techniques, such as focused ion beam (FIB), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), the microstructures underneath fracture surfaces were thoroughly investigated in an AM aluminum (AlSi10Mg) alloy with horizontal and vertical building orientation enduring very high cycle fatigue (VHCF) loading under the stress ratios R = −1, 0, and 0.5. Two VHCF failure specimens A and B were representatively selected to further examine SEM and TEM sample preparation via FIB milling. Specimen A was horizontally printed and failed at R = −1; specimen B was vertically printed and failed at R = 0. TEM samples A1 and B1 were lifted from locations near the crack initiation sites on the fracture surfaces of specimens A and B; The locations of TEM samples A2 and B2 kept away from the crack origin sites but still within the “fish-eye” region of crack steady growth. TEM observations show that there was no characteristic microstructure induced by VHCF in different oriented specimens and under various R values.

Förderung

  • Xi’an Aeronautical University

Zitieren

APA

Liu, L., Wang, S., Li, G., & Ma, Y. (2024). Microstructure Study on Very High Cycle Fatigue of an Additively Manufactured Aluminium Alloy via Advanced Characterization Methods. Applied Sciences, 14(5), 2025. https://doi.org/10.3390/app14052025

Vancouver

Liu L, Wang S, Li G, Ma Y. Microstructure Study on Very High Cycle Fatigue of an Additively Manufactured Aluminium Alloy via Advanced Characterization Methods. Applied Sciences. 2024;14(5):2025. doi:10.3390/app14052025

BibTeX
@article{Liu2024,
  author = {Liu, Lu and Wang, Shengnan and Li, Gang and Ma, Yifan},
  title = {Microstructure Study on Very High Cycle Fatigue of an Additively Manufactured Aluminium Alloy via Advanced Characterization Methods},
  journal = {Applied Sciences},
  year = {2024},
  volume = {14},
  number = {5},
  pages = {2025},
  doi = {10.3390/app14052025}
}
Kostenlos starten →