EUVIMEDScopri EUVIMED
Crossref

Corrosion resistance of three types of Co–Cr dental alloys manufactured by casting and selective laser melting

Sara M Al Taweel, Youssef S Al Jabbari, Arif Sufyan, Spiros Zinelis

European Journal of Oral Sciences · 2026-10-29

DOI: 10.1111/eos.70163 ↗

At a glance

Journal article in European Journal of Oral Sciences, published online on 2026-10-29. Written by Sara M Al Taweel and 3 co-authors. Institution: Dental Biomaterials Research and Development Chair, College of Dentistry, King Saud University, Riyadh, Saudi Arabia. 44 references. Funded by: King Saud University.

AbstractSubjectsDati bibliograficiCiteRelated studies

Abstract (original language)

The aim of this study was to investigate the corrosion resistance of three types of Co–Cr alloys manufactured by casting or selective laser melting (SLM). Six Co–Cr dental alloys were classified into three different types according to their formulation (containing Mo, W, or both as alloying elements) and according to the manufacturing process, namely, casting or SLM. Then the electrochemical properties were characterized by Anodic Polarization Scanning (AS) and Electrochemical Impedance Spectroscopy (EIS) in Ringer's and 0.1 M NaCl +0.1 M lactic acid solutions. E corr , I corr , E pit , and corrosion rate (CR) were estimated by AS and statistically analyzed ( α = 0.05). The EIS data fitted to a Randles circuit. Electrochemical testing revealed statistically significant differences for E corr and E pit among the alloys tested in the same solution, whereas no differences were identified in I corr or CR. The Nyquist plots exhibited semicircular profiles, indicating that the electrochemical response was predominantly controlled by charge transfer processes. For all groups, CR was found much higher in the acidic 0.1 M lactic acid + 0.1 M NaCl solution than in Ringer's one. The results of this study showed that CR depended on the solution rather than alloy type or manufacturing process.

Subjects

Author keywords

CAD/CAMCo–Cr–Mo alloyscastingcorrosion resistanceelectrochemical properties

Authors and institutions

  • Dental Biomaterials Research and Development Chair, College of Dentistry, King Saud University, Riyadh, Saudi Arabia.
  • Prosthetic Dental Sciences Department, College of Dentistry, King Saud University, Riyadh, Saudi Arabia.
  • Department of Biomaterials, School of Dentistry, National and Kapodistrian University of Athens, Athens, Greece.

Funding

  • King Saud University

Cite

APA

Taweel, S. M. A., Jabbari, Y. S. A., Sufyan, A., & Zinelis, S. (2026). Corrosion resistance of three types of Co–Cr dental alloys manufactured by casting and selective laser melting. European Journal of Oral Sciences. https://doi.org/10.1111/eos.70163

Vancouver

Taweel SMA, Jabbari YSA, Sufyan A, Zinelis S. Corrosion resistance of three types of Co–Cr dental alloys manufactured by casting and selective laser melting. European Journal of Oral Sciences. 2026. doi:10.1111/eos.70163

BibTeX
@article{Taweel2026,
  author = {Taweel, Sara M Al and Jabbari, Youssef S Al and Sufyan, Arif and Zinelis, Spiros},
  title = {Corrosion resistance of three types of Co–Cr dental alloys manufactured by casting and selective laser melting},
  journal = {European Journal of Oral Sciences},
  year = {2026},
  doi = {10.1111/eos.70163}
}
Start for free →