Corrosion resistance of three types of Co–Cr dental alloys manufactured by casting and selective laser melting
European Journal of Oral Sciences · 29.10.2026
DOI: 10.1111/eos.70163 ↗Kurz gefasst
Fachartikel in der Zeitschrift European Journal of Oral Sciences, online erschienen am 29.10.2026. Verfasst von Sara M Al Taweel und 3 weiteren Autor:innen. Beteiligte Einrichtung: Dental Biomaterials Research and Development Chair, College of Dentistry, King Saud University, Riyadh, Saudi Arabia. Die Arbeit nennt 44 Literaturangaben. Gefördert von: King Saud University.
Abstract (Originalsprache)
The aim of this study was to investigate the corrosion resistance of three types of Co–Cr alloys manufactured by casting or selective laser melting (SLM). Six Co–Cr dental alloys were classified into three different types according to their formulation (containing Mo, W, or both as alloying elements) and according to the manufacturing process, namely, casting or SLM. Then the electrochemical properties were characterized by Anodic Polarization Scanning (AS) and Electrochemical Impedance Spectroscopy (EIS) in Ringer's and 0.1 M NaCl +0.1 M lactic acid solutions. E corr , I corr , E pit , and corrosion rate (CR) were estimated by AS and statistically analyzed ( α = 0.05). The EIS data fitted to a Randles circuit. Electrochemical testing revealed statistically significant differences for E corr and E pit among the alloys tested in the same solution, whereas no differences were identified in I corr or CR. The Nyquist plots exhibited semicircular profiles, indicating that the electrochemical response was predominantly controlled by charge transfer processes. For all groups, CR was found much higher in the acidic 0.1 M lactic acid + 0.1 M NaCl solution than in Ringer's one. The results of this study showed that CR depended on the solution rather than alloy type or manufacturing process.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Dental Biomaterials Research and Development Chair, College of Dentistry, King Saud University, Riyadh, Saudi Arabia.
- Prosthetic Dental Sciences Department, College of Dentistry, King Saud University, Riyadh, Saudi Arabia.
- Department of Biomaterials, School of Dentistry, National and Kapodistrian University of Athens, Athens, Greece.
Förderung
- King Saud University
Zitieren
APA
Taweel, S. M. A., Jabbari, Y. S. A., Sufyan, A., & Zinelis, S. (2026). Corrosion resistance of three types of Co–Cr dental alloys manufactured by casting and selective laser melting. European Journal of Oral Sciences. https://doi.org/10.1111/eos.70163
Vancouver
Taweel SMA, Jabbari YSA, Sufyan A, Zinelis S. Corrosion resistance of three types of Co–Cr dental alloys manufactured by casting and selective laser melting. European Journal of Oral Sciences. 2026. doi:10.1111/eos.70163
BibTeX
@article{Taweel2026,
author = {Taweel, Sara M Al and Jabbari, Youssef S Al and Sufyan, Arif and Zinelis, Spiros},
title = {Corrosion resistance of three types of Co–Cr dental alloys manufactured by casting and selective laser melting},
journal = {European Journal of Oral Sciences},
year = {2026},
doi = {10.1111/eos.70163}
}
EUVIMED