EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Influence of printing orientation and post‐curing on optical and surface properties of definitive three‐dimensional‐printed dental resin with inorganic fillers

Luana Dos Santos Souza iD, Andrea Mendoza iD, Taciana Marco Ferraz Caneppele iD, Pablo Lenin Benitez Sellan iD, Eduardo Bresciani iD

European Journal of Oral Sciences · 2026-08 · 134 (4)

DOI: 10.1111/eos.70083 ↗

At a glance

Journal article in European Journal of Oral Sciences, published online on 2026-03-09. Written by Luana Dos Santos Souza and 4 co-authors. Institution: Department of Restorative Dentistry, Institute of Science and Technology, São Paulo State University (UNESP), São José dos Campos, Brazil. Major MEDLINE topics: Printing, Three-Dimensional, Composite Resins, Dental Materials. 30 references. The full text is freely available (open access, CC BY 4.0). Funded by: Coordenação de Aperfeiçoamento de Pessoal de Nível Superior.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

This study evaluated the influence of printing orientation and post‐curing on the color stability, gloss retention, and surface microhardness of a definitive three‐dimensional (3D)‐printed dental resin, a high‐strength photopolymer with inorganic fillers designed for permanent restorations, after immersion in a staining solution. Circular specimens (6 mm diameter and 1.5 mm thickness) were printed at 0°, 45°, and 90° orientations and divided into two groups: control ( n = 10), post‐cured according to the manufacturer's protocol, and negative control ( n = 10), without post‐curing. Baseline color ( L * , a * , b * ), gloss, and Knoop microhardness were measured, followed by reassessment after 21 days of immersion in a staining solution. Data were analyzed using two‐way and repeated‐measures analysis of variance ( α = 0.05). Non‐post‐cured specimens showed perceptible but clinically acceptable color changes. Microhardness decreased after staining in all groups, regardless of curing. Gloss significantly diminished post‐staining, with the control group printed at 45° showing superior retention. Printing orientation influenced color stability, with the 0° orientation showing the highest stability. Post‐curing enhanced color stability and gloss retention in definitive 3D‐printed resins. Printing orientation affected optical outcomes, emphasizing the importance of optimizing both parameters for long‐term esthetic and mechanical reliability.

Subjects

MeSH terms (MEDLINE)

Printing, Three-DimensionalComposite ResinsDental MaterialsSurface PropertiesColorHardnessMaterials TestingHumans

Author keywords

additive manufacturingcomputer‐aided designdental crowndental materials

Substances

Composite ResinsDental Materials

Authors and institutions

  • Department of Restorative Dentistry, Institute of Science and Technology, São Paulo State University (UNESP), São José dos Campos, Brazil.
  • Department of Restorative Dentistry and Prosthodontics, School of Dentistry, Universidad Espíritu Santo, Samborondón, Ecuador.

ORCID profiles: Luana Dos Santos Souza, Andrea Mendoza, Taciana Marco Ferraz Caneppele, Pablo Lenin Benitez Sellan, Eduardo Bresciani

Funding

  • Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Cite

APA

Souza, L. D. S., Mendoza, A., Caneppele, T. M. F., Benitez Sellan, P. L., & Bresciani, E. (2026). Influence of printing orientation and post‐curing on optical and surface properties of definitive three‐dimensional‐printed dental resin with inorganic fillers. European Journal of Oral Sciences, 134(4). https://doi.org/10.1111/eos.70083

Vancouver

Souza LDS, Mendoza A, Caneppele TMF, Benitez Sellan PL, Bresciani E. Influence of printing orientation and post‐curing on optical and surface properties of definitive three‐dimensional‐printed dental resin with inorganic fillers. European Journal of Oral Sciences. 2026;134(4). doi:10.1111/eos.70083

BibTeX
@article{Souza2026,
  author = {Souza, Luana Dos Santos and Mendoza, Andrea and Caneppele, Taciana Marco Ferraz and Benitez Sellan, Pablo Lenin and Bresciani, Eduardo},
  title = {Influence of printing orientation and post‐curing on optical and surface properties of definitive three‐dimensional‐printed dental resin with inorganic fillers},
  journal = {European Journal of Oral Sciences},
  year = {2026},
  volume = {134},
  number = {4},
  doi = {10.1111/eos.70083}
}
Start for free →