EUVIMEDEUVIMED entdecken
Crossref

Investigating the impact of post-curing cycles on surface hardness and color stability in 3D printed resin crowns

Peris Celikel, Fatih Sengul

Odontology · 2025

DOI: 10.1007/s10266-024-00956-8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Odontology, 2025. Verfasst von Peris Celikel und 1 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Dentistry, Ataturk University, Erzurum, Turkey. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Surface Properties, Materials Testing, Crowns. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 38 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluated the effect of different post-curing cycles on the Vickers hardness, color change, and translucency value of 3D printed methacrylic acid ester-based temporary and permanent crown resins. A total of 300 samples were printed in disk shape (ø:8 mm, thickness: 2 mm) using VarseoSmile Crown Plus (VSC) and VarseoSmile Temp (VST) materials from a 3D printer. These disks were divided into five subgroups (n = 30 each) based on flash-curing cycles (0, 750, 1500, 2250, and 3000). Surface hardness tests and color tests were conducted on both the green state and flash-cured groups. The data were analyzed using univariate analysis of variance (ANOVA). The hardness of 3D printed temporary and permanent crown resin increased with post-curing time. Compared to the post-curing cycle recommended by the manufacturer, no clinically significant color change (ΔE00 ≥ 2.25) was observed in any of the polymerized groups. It was determined that permanent crown material had a more translucent structure than temporary crown material. The interaction between material and post-curing had significant effects on surface hardness, color (ΔE00), and translucency of 3D printed methacrylic acid ester-based resins.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalSurface PropertiesMaterials TestingCrownsHardnessColorDental MaterialsMethacrylatesComposite Resins

Stichwörter der Autor:innen

Additive manufacturingColor changesThree-dimensional printingTranslucencyVickers hardness

Substanzen

Dental MaterialsMethacrylatesComposite Resins

Autor:innen und Institutionen

  • Faculty of Dentistry, Ataturk University, Erzurum, Turkey.
  • Faculty of Dentistry, Ataturk University, Erzurum, Turkey. fsengul@atauni.edu.tr.

Zitieren

APA

Celikel, P., & Sengul, F. (2025). Investigating the impact of post-curing cycles on surface hardness and color stability in 3D printed resin crowns. Odontology. https://doi.org/10.1007/s10266-024-00956-8

Vancouver

Celikel P, Sengul F. Investigating the impact of post-curing cycles on surface hardness and color stability in 3D printed resin crowns. Odontology. 2025. doi:10.1007/s10266-024-00956-8

BibTeX
@article{Celikel2025,
  author = {Celikel, Peris and Sengul, Fatih},
  title = {Investigating the impact of post-curing cycles on surface hardness and color stability in 3D printed resin crowns},
  journal = {Odontology},
  year = {2025},
  doi = {10.1007/s10266-024-00956-8}
}
Kostenlos starten →