EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Effect on hygroscopic characteristics of n‐ZnO additions to resin composite

Abdulaziz Alayed iD, Nikolaos Silikas iD, David C Watts iD

European Journal of Oral Sciences · 2025

DOI: 10.1111/eos.70029 ↗

At a glance

Journal article in European Journal of Oral Sciences, 2025. Written by Abdulaziz Alayed and 2 co-authors. Institution: Division of Dentistry, School of Medical Sciences, University of Manchester, Manchester, UK. Major MEDLINE topics: Composite Resins, Zinc Oxide. 33 references. The full text is freely available (open access, CC BY 4.0). Funded by: Saudi Arabian Cultural Bureau in London.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

This study investigates the effect of adding different amounts of n‐ZnO to model resin‐based composites on their hygroscopic characteristics. Six groups ( n = 5) were formulated using Bis‐GMA, TEGDMA, UDMA, inert barium glass powder, silica nanoparticles, and varying amounts of n‐ZnO (0–5 wt.%). The photoinitiator system included camphorquinone, diphenyliodonium hexafluorophosphate, and ethyl 4‐(dimethylamino) benzoate. Sorption, solubility, and hygroscopic expansion specimens were prepared following ISO 4049:2019 and immersed in water for 168 days. Sorption and solubility were assessed with an analytical balance, while hygroscopic expansion was measured using a laser scan micrometer. Zn 2 ⁺ release was analyzed using ICP‐MS ( n = 3). Increasing n‐ZnO concentrations significantly reduced sorption and solubility, with the control (0 wt.% n‐ZnO) showing the highest values (28.7 and 2.1 µg/mm 3 ) and the 2 wt.% n‐ZnO group showing the lowest (27 µg/mm 3 , −0.4 µg/mm 3 ). However, increasing the concentrations of n‐ZnO significantly increased the hygroscopic expansion. The volumetric expansion for the lowest (control) and highest (n‐ZnO at 3 wt.%) was 1.63% and 1.87%, respectively. ICP‐MS revealed progressively higher Zn 2 ⁺ release with increasing n‐ZnO concentration, peaking at 675.1 ppb in the 5 wt.% group. Overall, n‐ZnO reduced sorption and solubility while increasing expansion and Zn 2 ⁺ release, with all formulations meeting ISO 4049 standards.

Subjects

MeSH terms (MEDLINE)

Composite ResinsZinc OxideSolubilityWettabilityMaterials TestingSilicon DioxideNanoparticlesPolymethacrylic AcidsBisphenol A-Glycidyl MethacrylatePhotoinitiators, DentalPolyethylene Glycols

Author keywords

dental restorationnanoparticlespermanentpolymerizationsolubility

Substances

Composite ResinsZinc Oxidetriethylene glycol dimethacrylateSilicon DioxidePolymethacrylic AcidsBisphenol A-Glycidyl MethacrylatePhotoinitiators, DentalPolyethylene Glycols

Authors and institutions

  • Division of Dentistry, School of Medical Sciences, University of Manchester, Manchester, UK.
  • Department of Restorative Dental Science, College of Dentistry, King Saud University, Riyadh, Saudi Arabia.
  • Photon Science Institute, University of Manchester, Manchester, UK.

ORCID profiles: Abdulaziz Alayed, Nikolaos Silikas, David C Watts

Funding

  • Saudi Arabian Cultural Bureau in London

Cite

APA

Alayed, A., Silikas, N., & Watts, D. C. (2025). Effect on hygroscopic characteristics of n‐ZnO additions to resin composite. European Journal of Oral Sciences. https://doi.org/10.1111/eos.70029

Vancouver

Alayed A, Silikas N, Watts DC. Effect on hygroscopic characteristics of n‐ZnO additions to resin composite. European Journal of Oral Sciences. 2025. doi:10.1111/eos.70029

BibTeX
@article{Alayed2025,
  author = {Alayed, Abdulaziz and Silikas, Nikolaos and Watts, David C},
  title = {Effect on hygroscopic characteristics of n‐ZnO additions to resin composite},
  journal = {European Journal of Oral Sciences},
  year = {2025},
  doi = {10.1111/eos.70029}
}
Start for free →