EUVIMEDObjevte EUVIMED
Open access · CC BY-NC-ND 4.0

Effect of surface conditioning protocols on the repair bond strength of resin composite to CAD/CAM blocks: Bioactive‐glass, silica‐coated alumina, or aluminum oxide?

Büşra Karabulut Gençer iD, Ayşe Aslı Şenol iD, Ezgi Acar iD, Pınar Yılmaz Atalı iD, Bilge Tarçın iD, Mutlu Özcan iD

European Journal of Oral Sciences · 2025

DOI: 10.1111/eos.70016 ↗

At a glance

Journal article in European Journal of Oral Sciences, 2025. Written by Büşra Karabulut Gençer and 5 co-authors. Institution: Hamidiye Faculty of Dental Medicine, Department of Restorative Dentistry, University of Health Sciences, Istanbul, Turkey. Major MEDLINE topics: Aluminum Oxide, Composite Resins, Silicon Dioxide, Dental Bonding. Cited 3 times so far (Crossref); 59 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: TUBITAK-1002.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

This study evaluated the repair bond strengths of ceramic and hybrid ceramic CAD/CAM restorations following bioactive‐glass, silica‐coated alumina, and aluminum oxide surface treatments. Shear bond strength (SBS) tests, surface roughness, and scanning electron microscopic (SEM) evaluations were performed on 180 specimens (7×12×2 mm 3 and 5×5×3 mm 3 , respectively) of ceramic (IPS Empress) and hybrid ceramic (Cerasmart270) blocks. Samples were thermocycled (5°C–55°C, 5000 cycles) and silica‐coated alumina, Al 2 O 3 , or bioactive‐glass were used for surface conditioning. Resin composite was applied on substrate using two‐ (Tokuyama Universal) or one‐bottle (G‐Premio) universal adhesives, combined with the same brand universal shade composites (Omnichroma, Essentia Universal). SBS values were measured using a universal testing machine; failure types were analyzed using a stereomicroscope. Surface roughness was assessed with a profilometer, followed by SEM. Statistical analysis included ANOVA, Tukey HSD, and Fisher's Exact tests. The highest mean SBS values were observed for ceramics in conjunction with two‐bottle universal adhesives. No statistically significant differences were found in the SBS values for different surface conditioning treatments except for hybrid ceramic conditioned with Al 2 O 3 . Bioactive‐glass and silica‐coated alumina caused similar surface roughness as indicated by the SEM images. A surface conditioning method and an adhesive system are both essential for hybrid ceramic repairs, while the adhesive system was more critical for ceramics.

Subjects

MeSH terms (MEDLINE)

Aluminum OxideComposite ResinsSilicon DioxideDental BondingComputer-Aided DesignCeramicsGlassDental PorcelainSurface PropertiesMicroscopy, Electron, ScanningMaterials TestingShear StrengthDental Stress AnalysisHumansCoated Materials, Biocompatible

Author keywords

adhesionair‐abrasionaluminum oxidedental materialsdental restoration repairshear bond strength

Substances

Aluminum OxideComposite ResinsSilicon DioxideDental PorcelainCoated Materials, Biocompatible

Authors and institutions

  • Hamidiye Faculty of Dental Medicine, Department of Restorative Dentistry, University of Health Sciences, Istanbul, Turkey.
  • Faculty of Dentistry, Department of Restorative Dentistry, Marmara University, Istanbul, Turkey.
  • Center for Dental Medicine, Clinic of Masticatory Disorders and Dental Biomaterials, University of Zurich, Zurich, Switzerland.

ORCID profiles: Büşra Karabulut Gençer, Ayşe Aslı Şenol, Ezgi Acar, Pınar Yılmaz Atalı, Bilge Tarçın, Mutlu Özcan

Funding

  • TUBITAK-1002

Cite

APA

Gençer, B. K., Şenol, A. A., Acar, E., Atalı, P. Y., Tarçın, B., & Özcan, M. (2025). Effect of surface conditioning protocols on the repair bond strength of resin composite to CAD/CAM blocks: Bioactive‐glass, silica‐coated alumina, or aluminum oxide?. European Journal of Oral Sciences. https://doi.org/10.1111/eos.70016

Vancouver

Gençer BK, Şenol AA, Acar E, Atalı PY, Tarçın B, Özcan M. Effect of surface conditioning protocols on the repair bond strength of resin composite to CAD/CAM blocks: Bioactive‐glass, silica‐coated alumina, or aluminum oxide?. European Journal of Oral Sciences. 2025. doi:10.1111/eos.70016

BibTeX
@article{Gener2025,
  author = {Gençer, Büşra Karabulut and Şenol, Ayşe Aslı and Acar, Ezgi and Atalı, Pınar Yılmaz and Tarçın, Bilge and Özcan, Mutlu},
  title = {Effect of surface conditioning protocols on the repair bond strength of resin composite to CAD/CAM blocks: Bioactive‐glass, silica‐coated alumina, or aluminum oxide?},
  journal = {European Journal of Oral Sciences},
  year = {2025},
  doi = {10.1111/eos.70016}
}
Start for free →