EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Effect of surface conditioning protocols on the repair bond strength of resin composite to CAD/CAM blocks: Bioactive‐glass, silica‐coated alumina, or aluminum oxide?

Büşra Karabulut Gençer iD, Ayşe Aslı Şenol iD, Ezgi Acar iD, Pınar Yılmaz Atalı iD, Bilge Tarçın iD, Mutlu Özcan iD

European Journal of Oral Sciences · 2025

DOI: 10.1111/eos.70016 ↗

Kurz gefasst

Fachartikel in der Zeitschrift European Journal of Oral Sciences, 2025. Verfasst von Büşra Karabulut Gençer und 5 weiteren Autor:innen. Beteiligte Einrichtung: Hamidiye Faculty of Dental Medicine, Department of Restorative Dentistry, University of Health Sciences, Istanbul, Turkey. Hauptthemen laut MEDLINE: Aluminum Oxide, Composite Resins, Silicon Dioxide, Dental Bonding. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: TUBITAK-1002.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluated the repair bond strengths of ceramic and hybrid ceramic CAD/CAM restorations following bioactive‐glass, silica‐coated alumina, and aluminum oxide surface treatments. Shear bond strength (SBS) tests, surface roughness, and scanning electron microscopic (SEM) evaluations were performed on 180 specimens (7×12×2 mm 3 and 5×5×3 mm 3 , respectively) of ceramic (IPS Empress) and hybrid ceramic (Cerasmart270) blocks. Samples were thermocycled (5°C–55°C, 5000 cycles) and silica‐coated alumina, Al 2 O 3 , or bioactive‐glass were used for surface conditioning. Resin composite was applied on substrate using two‐ (Tokuyama Universal) or one‐bottle (G‐Premio) universal adhesives, combined with the same brand universal shade composites (Omnichroma, Essentia Universal). SBS values were measured using a universal testing machine; failure types were analyzed using a stereomicroscope. Surface roughness was assessed with a profilometer, followed by SEM. Statistical analysis included ANOVA, Tukey HSD, and Fisher's Exact tests. The highest mean SBS values were observed for ceramics in conjunction with two‐bottle universal adhesives. No statistically significant differences were found in the SBS values for different surface conditioning treatments except for hybrid ceramic conditioned with Al 2 O 3 . Bioactive‐glass and silica‐coated alumina caused similar surface roughness as indicated by the SEM images. A surface conditioning method and an adhesive system are both essential for hybrid ceramic repairs, while the adhesive system was more critical for ceramics.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Aluminum OxideComposite ResinsSilicon DioxideDental BondingComputer-Aided DesignCeramicsGlassDental PorcelainSurface PropertiesMicroscopy, Electron, ScanningMaterials TestingShear StrengthDental Stress AnalysisHumansCoated Materials, Biocompatible

Stichwörter der Autor:innen

adhesionair‐abrasionaluminum oxidedental materialsdental restoration repairshear bond strength

Substanzen

Aluminum OxideComposite ResinsSilicon DioxideDental PorcelainCoated Materials, Biocompatible

Autor:innen und Institutionen

  • Hamidiye Faculty of Dental Medicine, Department of Restorative Dentistry, University of Health Sciences, Istanbul, Turkey.
  • Faculty of Dentistry, Department of Restorative Dentistry, Marmara University, Istanbul, Turkey.
  • Center for Dental Medicine, Clinic of Masticatory Disorders and Dental Biomaterials, University of Zurich, Zurich, Switzerland.

ORCID-Profile: Büşra Karabulut Gençer, Ayşe Aslı Şenol, Ezgi Acar, Pınar Yılmaz Atalı, Bilge Tarçın, Mutlu Özcan

Förderung

  • TUBITAK-1002

Zitieren

APA

Gençer, B. K., Şenol, A. A., Acar, E., Atalı, P. Y., Tarçın, B., & Özcan, M. (2025). Effect of surface conditioning protocols on the repair bond strength of resin composite to CAD/CAM blocks: Bioactive‐glass, silica‐coated alumina, or aluminum oxide?. European Journal of Oral Sciences. https://doi.org/10.1111/eos.70016

Vancouver

Gençer BK, Şenol AA, Acar E, Atalı PY, Tarçın B, Özcan M. Effect of surface conditioning protocols on the repair bond strength of resin composite to CAD/CAM blocks: Bioactive‐glass, silica‐coated alumina, or aluminum oxide?. European Journal of Oral Sciences. 2025. doi:10.1111/eos.70016

BibTeX
@article{Gener2025,
  author = {Gençer, Büşra Karabulut and Şenol, Ayşe Aslı and Acar, Ezgi and Atalı, Pınar Yılmaz and Tarçın, Bilge and Özcan, Mutlu},
  title = {Effect of surface conditioning protocols on the repair bond strength of resin composite to CAD/CAM blocks: Bioactive‐glass, silica‐coated alumina, or aluminum oxide?},
  journal = {European Journal of Oral Sciences},
  year = {2025},
  doi = {10.1111/eos.70016}
}
Kostenlos starten →