EUVIMEDEUVIMED entdecken
Crossref

Four‐point flexural strength and microtensile bond strength of digitally and conventionally veneered zirconia

M Utar iD, Z Demirtağ iD

European Journal of Oral Sciences · 2023

DOI: 10.1111/eos.12926 ↗

Kurz gefasst

Fachartikel in der Zeitschrift European Journal of Oral Sciences, 2023. Verfasst von M Utar und 1 weiteren Autor:innen. Beteiligte Einrichtung: Kırıkkale University, Kırıkkale, Turkey. Hauptthemen laut MEDLINE: Flexural Strength, Dental Bonding. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 31 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study intended to evaluate the effect of digital veneering on four‐point flexural strength (FS) and microtensile bond strength (μTBS) of veneered zirconia. Two different zirconia blocks, a lithium disilicate and a feldspathic ceramic block, and two different layering ceramics were used. IPS e.max Zir CAD (ZC) and Vita In‐Ceram YZ (YZ) with yttria stabilized tetragonal zirconia polycrystals (3Y‐TZP) were used as substructures. IPS e.max CAD (LD), Vita Mark II (VMII), IPS e.max Ceram (EC) and Vita VM9 (VM9) were used for veneering. Resin cement and fusion ceramic were placed between veneer and zirconia substructure for digital veneering. A total of one hundred and fifty specimens in five groups ( n = 30) were prepared for FS and tested in universal machine at 1.0 mm/min. One hundred specimens in five groups ( n = 20) were obtained for the μTBS and tested at 1.0 mm/min. Statistical analysis was made by one way ANOVA and Tukey HSD. Conventional veneering showed statistically significant FS. ZC veneered with EC had the highest mean FS and the lowest was obtained in groups veneered through resin cement. YZ layered with VM9 had the highest mean μTBS. ZC veneered through fusion ceramic and YZ veneered through resin cement showed significantly lower and similar μTBS.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Flexural StrengthDental BondingResin CementsMaterials TestingDental Stress AnalysisSurface PropertiesDental PorcelainCeramicsZirconiumDental Veneers

Stichwörter der Autor:innen

computer-aided designmaterials testingresin cementstensile strengthzirconia

Substanzen

zirconium oxideResin CementsDental PorcelainZirconium

Autor:innen und Institutionen

  • Kırıkkale University, Kırıkkale, Turkey.

ORCID-Profile: M Utar, Z Demirtağ

Zitieren

APA

Utar, M., & Demirtağ, Z. (2023). Four‐point flexural strength and microtensile bond strength of digitally and conventionally veneered zirconia. European Journal of Oral Sciences. https://doi.org/10.1111/eos.12926

Vancouver

Utar M, Demirtağ Z. Four‐point flexural strength and microtensile bond strength of digitally and conventionally veneered zirconia. European Journal of Oral Sciences. 2023. doi:10.1111/eos.12926

BibTeX
@article{Utar2023,
  author = {Utar, M and Demirtağ, Z},
  title = {Four‐point flexural strength and microtensile bond strength of digitally and conventionally veneered zirconia},
  journal = {European Journal of Oral Sciences},
  year = {2023},
  doi = {10.1111/eos.12926}
}
Kostenlos starten →