EUVIMEDEUVIMED entdecken
VergleichsstudieOpen Access · CC BY-NC-ND 4.0

Comparison of shock absorption capacities of three types of mouthguards: A comparative in vitro study

Yohan Arfi iD, Aurélie Benoit iD, Laurent Tapie iD, Baptiste Sandoz iD, Sylvain Persohn iD, Jean-Pierre Attal iD, Christophe Rignon-Bret iD

Dental Traumatology · 2024-12 · 40 (6) · 702-711

DOI: 10.1111/edt.12968 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift Dental Traumatology, online erschienen am 25.05.2024. Verfasst von Yohan Arfi und 6 weiteren Autor:innen. Beteiligte Einrichtung: Innovative Biomaterials and Interfaces Research Unit - UR4462, University Paris Cité, Montrouge, France. Hauptthemen laut MEDLINE: Mouth Protectors, Equipment Design, Printing, Three-Dimensional. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: SEGULA Technologies.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background/Aim 3D printing processes can be used to manufacture custom‐made mouthguards for sports activities. Few studies have compared the impact performance of industrial‐created mouthguards with that of custom‐made mouthguards manufactured by thermoforming or 3D printing. The objective of this in vitro study was to compare the shock absorption capacities of custom‐made mouthguards manufactured by 3D printing with industrial mouthguards and thermoformed ethylene vinyl acetate (EVA) mouthguards. Materials and Methods For each type of mouthguard, eight samples were produced. 3D‐printed mouthguards were manufactured using digital light processing technology. Each mouthguard was subjected to an impact performance test defined by the standard AFNOR XP S72‐427, which evaluate maximum deceleration and force transmitted during impact. The thickness of each mouthguard before and after a series of five impacts was measured at the impacted inter‐incisal area.

Results

The mean maximum decelerations during impact ranged from 129 to 189 g for industrial mouthguards, 287 to 425 g for thermoformed EVA mouthguards, and 277 to 302 g for 3D‐printed mouthguards. The mean reduction in mouthguard thickness at the impact zone after five tests was 1.2 mm for industrial mouthguards, 0.6 mm for 3D‐printed mouthguards, and 2.2 mm for thermoformed EVA mouthguards.

Conclusions

Custom‐made 3D printed mouthguards showed slightly better shock absorption ability than thermoformed mouthguards with respect to the indicator proposed in XP S72‐427. They seemed to combine the practical advantages of thermoformed mouthguards in sports with better shock absorption capacity and lower cost. Furthermore, they had the least thickness variation during the test, and their shock absorption capacity was the least affected by repeated mechanical tests. Other types of 3D‐printing resin materials that will become available must continue to be tested for shock absorption to provide the best protection to users at low cost.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Mouth ProtectorsEquipment DesignPrinting, Three-DimensionalIn Vitro TechniquesMaterials TestingHumansPolyvinyls

Stichwörter der Autor:innen

digital light processingdrop mass impactmechanical testsmouth protectorsprinting three dimensional

Substanzen

Polyvinylsethylenevinylacetate copolymer

Autor:innen und Institutionen

  • Innovative Biomaterials and Interfaces Research Unit - UR4462, University Paris Cité, Montrouge, France.
  • EPF School of Engineering, Cachan, France.
  • Arts et Métiers Institute of Technology, University Sorbonne Paris Nord, IBHGC, University HESAM, Paris, France.
  • Charles Foix Hospital - AP-HP, Ivry-sur-Seine, France.

ORCID-Profile: Yohan Arfi, Aurélie Benoit, Laurent Tapie, Baptiste Sandoz, Sylvain Persohn, Jean-Pierre Attal, Christophe Rignon-Bret

Förderung

  • SEGULA Technologies

Zitieren

APA

Arfi, Y., Benoit, A., Tapie, L., Sandoz, B., Persohn, S., Attal, J. P., & Rignon-Bret, C. (2024). Comparison of shock absorption capacities of three types of mouthguards: A comparative in vitro study. Dental Traumatology, 40(6), 702-711. https://doi.org/10.1111/edt.12968

Vancouver

Arfi Y, Benoit A, Tapie L, Sandoz B, Persohn S, Attal JP, et al. Comparison of shock absorption capacities of three types of mouthguards: A comparative in vitro study. Dental Traumatology. 2024;40(6):702-711. doi:10.1111/edt.12968

BibTeX
@article{Arfi2024,
  author = {Arfi, Yohan and Benoit, Aurélie and Tapie, Laurent and Sandoz, Baptiste and Persohn, Sylvain and Attal, Jean-Pierre and Rignon-Bret, Christophe},
  title = {Comparison of shock absorption capacities of three types of mouthguards: A comparative in vitro study},
  journal = {Dental Traumatology},
  year = {2024},
  volume = {40},
  number = {6},
  pages = {702--711},
  doi = {10.1111/edt.12968}
}
Kostenlos starten →