EUVIMEDEUVIMED entdecken
FallberichtOpen Access · CC BY-NC-ND 4.0

Application of CAD / CAM technologies and materials for prosthetic restoration of severely damaged teeth—clinical cases

Z Tomova, Y Zhekov, G Alexandrov, A Vlahova, E Vasileva iD

Australian Dental Journal · 2023

DOI: 10.1111/adj.12976 ↗

Kurz gefasst

Fallbericht in der Zeitschrift Australian Dental Journal, 2023. Verfasst von Z Tomova und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthetic Dental Medicine, Faculty of Dental Medicine, Medical University of Plovdiv, Plovdiv, Bulgaria. Hauptthemen laut MEDLINE: Crowns, Dental Porcelain. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Medical University Plovdiv.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In cases of severely damaged teeth with limited coronal tooth structure and remaining hard dental tissues subgingivally, a custom‐made post‐and‐core restoration is required. Teeth with non‐circular canal space also require this type of restoration because the build‐up with pre‐fabricated posts could lead to thick cement layer. The development of CAD/CAM technologies widens the range of the materials that can be used for prosthetic restorations. Along with base dental alloys, newly developed materials may be applied. The aim of the article is to present four clinical cases of severely damaged teeth which utilize different materials and different production techniques for custom post‐and‐core fabrication. In the first clinical case, a metal post‐and‐core restoration was fabricated by direct metal laser sintering. In the second clinical case, digital technologies were used to produce a 3D‐printed resin prototype for further investing and casting from base metal dental alloy. In the third clinical case, fibre‐reinforced composite was used for fabrication of the custom post‐and‐core by milling. In the fourth clinical case, the restoration is produced by milling of lithium disilicate ceramics IPS emax CAD (Ivoclar Vivadent, Lichtenstein). The bond between the fibre‐reinforced composite post‐and‐core and the hard dental tissues offered possibility to compensate—to some extent—the shape of the preparation which was not optimal. CAD/CAM technologies applied in these clinical cases provided combination of high accuracy of fitting with good stability and individual shape of the restorations. © 2023 Australian Dental Association.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CrownsDental PorcelainHumansAustraliaCeramicsComputer-Aided DesignMaterials TestingDental Prosthesis Design

Stichwörter der Autor:innen

CAD/CAMmaterialspost-and-core

Substanzen

Dental Porcelain

Autor:innen und Institutionen

  • Department of Prosthetic Dental Medicine, Faculty of Dental Medicine, Medical University of Plovdiv, Plovdiv, Bulgaria.

ORCID-Profile: E Vasileva

Förderung

  • Medical University Plovdiv

Zitieren

APA

Tomova, Z., Zhekov, Y., Alexandrov, G., Vlahova, A., & Vasileva, E. (2023). Application of CAD / CAM technologies and materials for prosthetic restoration of severely damaged teeth—clinical cases. Australian Dental Journal. https://doi.org/10.1111/adj.12976

Vancouver

Tomova Z, Zhekov Y, Alexandrov G, Vlahova A, Vasileva E. Application of CAD / CAM technologies and materials for prosthetic restoration of severely damaged teeth—clinical cases. Australian Dental Journal. 2023. doi:10.1111/adj.12976

BibTeX
@article{Tomova2023,
  author = {Tomova, Z and Zhekov, Y and Alexandrov, G and Vlahova, A and Vasileva, E},
  title = {Application of CAD / CAM technologies and materials for prosthetic restoration of severely damaged teeth—clinical cases},
  journal = {Australian Dental Journal},
  year = {2023},
  doi = {10.1111/adj.12976}
}
Kostenlos starten →