EUVIMEDSkopri EUVIMED
Crossref

Passive Achromatic Phase Shifter Fabricated Using Ultrafast Laser Inscription

Glen Douglass, Elizabeth Arcadi, Stephanie Rossini-Bryson, Eckhart Spalding, Marc-Antoine Martinod, Peter Tuthill, Michael J. Withford, Barnaby Norris, Olivier Guyon, Simon Gross

Journal of Lightwave Technology · 2025-05-01 · 43 (9) · 4416-4421

DOI: 10.1109/jlt.2025.3534653 ↗

At a glance

Journal article in Journal of Lightwave Technology, published on 2025-05-01. Written by Glen Douglass and 9 co-authors. Cited 4 times so far (Crossref); 27 references. Funded by: Australian Research Council, Japan Society for the Promotion of Science, NCRIS-enabled Australian National Fabrication Facility.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Phase shifters are a key component in photonic integrated circuits. Passive phase shifters utilize a path length difference or an effective refractive index difference to generate a phase delay. However, these methods are wavelength-dependent, making them unsuitable for broadband applications. This manuscript demonstrates, for the first time, the fabrication of achromatic phase shifters using ultrafast laser inscription. The designed achromatic phase shifters employ a multi-segmented technique that leverages differential waveguide dispersion to correct for the wavelength dependency. To characterize the waveguide dispersion, point-by-point Bragg gratings are inscribed within waveguides of different widths. After determining the multi-segment design, adiabatic tapers are added to minimize losses and to ensure only the fundamental mode propagates. The tapers are designed using a new multi-sectional structure, enabling the sections to be re-arranged according to the waveguide width/diameter creating smooth structures, and allowing unnecessary sections to be removed, minimizing the overall device length. The $180^{\circ }$ phase shifter is 3683.5 μm long with a measured phase shift of 171.5 $\pm \,4^{\circ }$ from 1440 to 1640 nm. The phase shift is polarization-independent, as the fabricated waveguides exhibit minimal birefringence. The device is $\approx$ 4 times shorter than a comparable low-index contrast lithographic phase shifter and 401.7 μm longer than one fabricated using a high-index contrast lithographic platform. The compact length is attributed to the use of multi-mode waveguides that increase the dynamic range of the differential dispersion.

Funding

  • Australian Research Council
  • Japan Society for the Promotion of Science
  • NCRIS-enabled Australian National Fabrication Facility

Cite

APA

Douglass, G., Arcadi, E., Rossini-Bryson, S., Spalding, E., Martinod, M., Tuthill, P., Withford, M. J., Norris, B., Guyon, O., & Gross, S. (2025). Passive Achromatic Phase Shifter Fabricated Using Ultrafast Laser Inscription. Journal of Lightwave Technology, 43(9), 4416-4421. https://doi.org/10.1109/jlt.2025.3534653

Vancouver

Douglass G, Arcadi E, Rossini-Bryson S, Spalding E, Martinod M, Tuthill P, et al. Passive Achromatic Phase Shifter Fabricated Using Ultrafast Laser Inscription. Journal of Lightwave Technology. 2025;43(9):4416-4421. doi:10.1109/jlt.2025.3534653

BibTeX
@article{Douglass2025,
  author = {Douglass, Glen and Arcadi, Elizabeth and Rossini-Bryson, Stephanie and Spalding, Eckhart and Martinod, Marc-Antoine and Tuthill, Peter and Withford, Michael J. and Norris, Barnaby and Guyon, Olivier and Gross, Simon},
  title = {Passive Achromatic Phase Shifter Fabricated Using Ultrafast Laser Inscription},
  journal = {Journal of Lightwave Technology},
  year = {2025},
  volume = {43},
  number = {9},
  pages = {4416--4421},
  doi = {10.1109/jlt.2025.3534653}
}
Start for free →