Passive Achromatic Phase Shifter Fabricated Using Ultrafast Laser Inscription
Journal of Lightwave Technology · 01.05.2025 · 43 (9) · 4416-4421
DOI: 10.1109/jlt.2025.3534653 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Lightwave Technology, erschienen am 01.05.2025. Verfasst von Glen Douglass und 9 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 27 Literaturangaben. Gefördert von: Australian Research Council, Japan Society for the Promotion of Science, NCRIS-enabled Australian National Fabrication Facility.
Abstract (Originalsprache)
Phase shifters are a key component in photonic integrated circuits. Passive phase shifters utilize a path length difference or an effective refractive index difference to generate a phase delay. However, these methods are wavelength-dependent, making them unsuitable for broadband applications. This manuscript demonstrates, for the first time, the fabrication of achromatic phase shifters using ultrafast laser inscription. The designed achromatic phase shifters employ a multi-segmented technique that leverages differential waveguide dispersion to correct for the wavelength dependency. To characterize the waveguide dispersion, point-by-point Bragg gratings are inscribed within waveguides of different widths. After determining the multi-segment design, adiabatic tapers are added to minimize losses and to ensure only the fundamental mode propagates. The tapers are designed using a new multi-sectional structure, enabling the sections to be re-arranged according to the waveguide width/diameter creating smooth structures, and allowing unnecessary sections to be removed, minimizing the overall device length. The $180^{\circ }$ phase shifter is 3683.5 μm long with a measured phase shift of 171.5 $\pm \,4^{\circ }$ from 1440 to 1640 nm. The phase shift is polarization-independent, as the fabricated waveguides exhibit minimal birefringence. The device is $\approx$ 4 times shorter than a comparable low-index contrast lithographic phase shifter and 401.7 μm longer than one fabricated using a high-index contrast lithographic platform. The compact length is attributed to the use of multi-mode waveguides that increase the dynamic range of the differential dispersion.
Förderung
- Australian Research Council
- Japan Society for the Promotion of Science
- NCRIS-enabled Australian National Fabrication Facility
Zitieren
APA
Douglass, G., Arcadi, E., Rossini-Bryson, S., Spalding, E., Martinod, M., Tuthill, P., Withford, M. J., Norris, B., Guyon, O., & Gross, S. (2025). Passive Achromatic Phase Shifter Fabricated Using Ultrafast Laser Inscription. Journal of Lightwave Technology, 43(9), 4416-4421. https://doi.org/10.1109/jlt.2025.3534653
Vancouver
Douglass G, Arcadi E, Rossini-Bryson S, Spalding E, Martinod M, Tuthill P, et al. Passive Achromatic Phase Shifter Fabricated Using Ultrafast Laser Inscription. Journal of Lightwave Technology. 2025;43(9):4416-4421. doi:10.1109/jlt.2025.3534653
BibTeX
@article{Douglass2025,
author = {Douglass, Glen and Arcadi, Elizabeth and Rossini-Bryson, Stephanie and Spalding, Eckhart and Martinod, Marc-Antoine and Tuthill, Peter and Withford, Michael J. and Norris, Barnaby and Guyon, Olivier and Gross, Simon},
title = {Passive Achromatic Phase Shifter Fabricated Using Ultrafast Laser Inscription},
journal = {Journal of Lightwave Technology},
year = {2025},
volume = {43},
number = {9},
pages = {4416--4421},
doi = {10.1109/jlt.2025.3534653}
}
EUVIMED