Solvent- and catalyst-free bio-conversion of waste polyurethane foams into high-performance 3D printing resin
National Science Review · 10.11.2025 · 12 (12)
DOI: 10.1093/nsr/nwaf501 ↗Kurz gefasst
Fachartikel in der Zeitschrift National Science Review, online erschienen am 17.11.2025. Verfasst von Xiaoyu Zhang und 10 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Chemical Engineering and Low-carbon Technology, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou…. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Pioneer R&D Program of Zhejiang.
Abstract (Originalsprache)
The end-of-life treatment of thermoset polyurethane foam (PUF) is an environmental challenge that has remained unresolved for decades. Current chemical recycling strategies are economically prohibitive to implement due to the complex multi-step process and use of catalyst/solvent. Here, we report a one-step upcycling strategy that transforms PUF waste into 3D photo-printing resins without using any catalyst or solvent. Our process employs bio-based itaconic acid as a single reagent that not only degrades PUF into fragments but also generates photocurable vinyl end-groups in situ. Incorporation of additional bio-based monomers (tetrahydrofurfuryl methacrylate and l-lysine diisocyanate) allows formulation of a photo-sensitive resin. The corresponding 3D photo-printed polymer, made entirely from PUF waste and bio-monomers (excluding the photo-initiator), exhibits exceptional mechanical performance (tensile strength: 26.3 MPa, toughness: 16.2 MJ m−3) relative to other commercial 3D photo-printed polymers. Our simple process that upcycles polymer wastes using solely bio-derived reagents points to a promising direction towards sustainable development of polymer materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Chemical Engineering and Low-carbon Technology, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310058, China.
- Zhejiang Key Laboratory of Intelligent Manufacturing for Functional Chemicals, ZJU-Hangzhou Global Scientific and Technological Innovation Center, Zhejiang University, Hangzhou 311215, China.
- Ningbo Innovation Center, Zhejiang University, Ningbo 315807, China.
- School of Materials Science and Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China.
- Key Laboratory of Refrigeration and Cryogenic Technology of Zhejiang Province, Institute of Refrigeration and Cryogenics, Zhejiang University, Hangzhou 310027, China.
- Key Laboratory of Special Functional and Intelligent Polymer Materials, College of Chemistry and Chemical Engineering, Northwestern Polytechnical University, Xi'an 710129, China.
ORCID-Profile: Qian Zhao
Förderung
- National Natural Science Foundation of China
- Pioneer R&D Program of Zhejiang
Zitieren
APA
Zhang, X., Pu, X., Xia, L., Peng, W., Ji, Y., Xu, J., Wu, J., Jiang, L., Zhao, Q., Fang, Z., & Xie, T. (2025). Solvent- and catalyst-free bio-conversion of waste polyurethane foams into high-performance 3D printing resin. National Science Review, 12(12). https://doi.org/10.1093/nsr/nwaf501
Vancouver
Zhang X, Pu X, Xia L, Peng W, Ji Y, Xu J, et al. Solvent- and catalyst-free bio-conversion of waste polyurethane foams into high-performance 3D printing resin. National Science Review. 2025;12(12). doi:10.1093/nsr/nwaf501
BibTeX
@article{Zhang2025,
author = {Zhang, Xiaoyu and Pu, Xingqun and Xia, Lianlian and Peng, Wenjun and Ji, Ying and Xu, Jieyang and Wu, Jingjun and Jiang, Long and Zhao, Qian and Fang, Zizheng and Xie, Tao},
title = {Solvent- and catalyst-free bio-conversion of waste polyurethane foams into high-performance 3D printing resin},
journal = {National Science Review},
year = {2025},
volume = {12},
number = {12},
doi = {10.1093/nsr/nwaf501}
}
EUVIMED