EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

AI‐Directed 3D Printing of Hierarchical Polyurethane Foams

Dhanush Patil iD, Jie Tian, Kun Jiang, Clarissa Westover iD, Sri Vaishnavi Thummalapalli iD, Arunachalam Ramanathan, Arpita Shome, Natalie Crutchfield iD, M Taylor Sobczak iD, Sean Lee, Hongyue Sun, Elizabeth J Brisbois iD und 4 weitere

Advanced Science · 2026-02 · 13 (8)

DOI: 10.1002/advs.202515122 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 29.11.2025. Verfasst von Dhanush Patil und 15 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering, College of Engineering, University of Georgia, 302 E. Campus Rd, Athens, GA, 30602, USA. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 90 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation, American Chemical Society, National Science Foundation Graduate Research Fellowship Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hierarchical porous materials enable next‐generation protective, thermal, and biomedical devices by leveraging multiscale architectures with tunable mechanical and thermal properties. Current 3D printing techniques mainly yield periodic lattices and support limited polymer types, restricting patterning possibilities and scalability. Stochastic foam architectures, with heterogeneous and interconnected pores, mimic biological structures for improved energy dissipation and functional adaptability. However, scalable additive manufacturing of such foams remains scarcely explored. Here, a direct ink writing (DIW) strategy couples static mixer‐enabled reactive extrusion and in situ polymerization to manufacture stochastic polyurethane (PU) foams at ambient conditions, eliminating post‐processing. Precise control over pore size (0.2 µm to 1.2 mm), porosity (65–95%), and open‐cell architecture delivers thermal conductivities down to 0.067 W m −1 K −1 and elastic recovery exceeding 90% after 5000 cycles. A multi‐agent artificial intelligence framework enables the patterning of spatially organized, bioinspired motifs into print‐ready CAD geometries, resulting in architecturally structured foams with tailored anisotropy and spatial thermal management. Flow‐rate modulation further tunes morphology, optimizing the balance between stiffness and damping. This manufacturing platform integrates stochastic pore formation, AI‐guided patterning, and mechanical–thermal optimization to realize scalable, customizable materials for impact protection, wearable thermotherapy, and adaptive healthcare, advancing digital manufacturing, smart materials, and personalized function.

Schlagwörter

Stichwörter der Autor:innen

3D printingpatterningpolyurethane foamporous media

Autor:innen und Institutionen

  • Mechanical Engineering, College of Engineering, University of Georgia, 302 E. Campus Rd, Athens, GA, 30602, USA.
  • School for the Engineering of Matter, Transport, and Energy and Biodesign Center for Sustainable Macromolecular Materials and Manufacturing (SM3), Arizona State University, Tempe, AZ, 85287, USA.
  • School of Chemical, Materials & Biomedical Engineering, College of Engineering, University of Georgia, Athens, GA, 30602, USA.
  • Department of Pharmaceutical & Biomedical Sciences, College of Pharmacy, University of Georgia, Athens, GA, 30602, USA.
  • School of Molecular Sciences and Biodesign Center for Sustainable Macromolecular Materials and Manufacturing (SM3), Arizona State University, Tempe, AZ, 85287, USA.
  • Professor of Mechanical Engineering, School of Environmental, Civil, Agricultural and Mechanical (ECAM), University of Georgia, Athens, GA, 30602, USA.

ORCID-Profile: Dhanush Patil, Clarissa Westover, Sri Vaishnavi Thummalapalli, Natalie Crutchfield, M Taylor Sobczak, Elizabeth J Brisbois, Hitesh Handa, Kenan Song

Förderung

  • National Science Foundation
  • American Chemical Society
  • National Science Foundation Graduate Research Fellowship Program
  • Air Force Office of Scientific Research
  • Office of Naval Research
  • Qatar National Research Fund

Zitieren

APA

Patil, D., Tian, J., Jiang, K., Westover, C., Thummalapalli, S. V., Ramanathan, A., Shome, A., Crutchfield, N., Sobczak, M. T., Lee, S., Sun, H., Brisbois, E. J., Handa, H., Long, T. E., Wang, X., & Song, K. (2026). AI‐Directed 3D Printing of Hierarchical Polyurethane Foams. Advanced Science, 13(8). https://doi.org/10.1002/advs.202515122

Vancouver

Patil D, Tian J, Jiang K, Westover C, Thummalapalli SV, Ramanathan A, et al. AI‐Directed 3D Printing of Hierarchical Polyurethane Foams. Advanced Science. 2026;13(8). doi:10.1002/advs.202515122

BibTeX
@article{Patil2026,
  author = {Patil, Dhanush and Tian, Jie and Jiang, Kun and Westover, Clarissa and Thummalapalli, Sri Vaishnavi and Ramanathan, Arunachalam and Shome, Arpita and Crutchfield, Natalie and Sobczak, M Taylor and Lee, Sean and Sun, Hongyue and Brisbois, Elizabeth J and Handa, Hitesh and Long, Timothy E and Wang, Xianqiao and Song, Kenan},
  title = {AI‐Directed 3D Printing of Hierarchical Polyurethane Foams},
  journal = {Advanced Science},
  year = {2026},
  volume = {13},
  number = {8},
  doi = {10.1002/advs.202515122}
}
Kostenlos starten →