EUVIMEDEUVIMED entdecken
Crossref

Head Impact Modeling to Support a Rotational Combat Helmet Drop Test

Ryan Terpsma, Rika Wright Carlsen, Ron Szalkowski, Sushant Malave, Alice Lux Fawzi, Christian Franck, Chad Hovey

Military Medicine · 2023

DOI: 10.1093/milmed/usab374 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Military Medicine, 2023. Verfasst von Ryan Terpsma und 6 weiteren Autor:innen. Beteiligte Einrichtung: Terminal Ballistics Technology Department 5421, Sandia National Laboratories, Albuquerque, NM 87185, USA. Hauptthemen laut MEDLINE: Head Protective Devices, Brain Injuries, Traumatic. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 40 Literaturangaben. Gefördert von: the Office of Naval Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Introduction

The Advanced Combat Helmet (ACH) military specification (mil-spec) provides blunt impact acceleration criteria that must be met before use by the U.S. warfighter. The specification, which requires a helmeted magnesium Department of Transportation (DOT) headform to be dropped onto a steel hemispherical target, results in a translational headform impact response. Relative to translations, rotations of the head generate higher brain tissue strains. Excessive strain has been implicated as a mechanical stimulus leading to traumatic brain injury (TBI). We hypothesized that the linear constrained drop test method of the ACH specification underreports the potential for TBI. Materials and Methods To establish a baseline of translational acceleration time histories, we conducted linear constrained drop tests based on the ACH specification and then performed simulations of the same to verify agreement between experiment and simulation. We then produced a high-fidelity human head digital twin and verified that biological tissue responses matched experimental results. Next, we altered the ACH experimental configuration to use a helmeted Hybrid III headform, a freefall cradle, and an inclined anvil target. This new, modified configuration allowed both a translational and a rotational headform response. We applied this experimental rotation response to the skull of our human digital twin and compared brain deformation relative to the translational baseline.

Results

The modified configuration produced brain strains that were 4.3 times the brain strains from the linear constrained configuration.

Conclusions

We provide a scientific basis to motivate revision of the ACH mil-spec to include a rotational component, which would enhance the test’s relevance to TBI arising from severe head impacts.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Head Protective DevicesBrain Injuries, TraumaticHumansBiomechanical PhenomenaHeadSkullAcceleration

Autor:innen und Institutionen

  • Terminal Ballistics Technology Department 5421, Sandia National Laboratories, Albuquerque, NM 87185, USA.
  • Department of Engineering, Robert Morris University, Moon Township, PA 15108, USA.
  • Team Wendy LLC, Cleveland, OH 44110, USA.
  • School of Engineering, Brown University, Providence, RI 02912, USA.
  • Department of Mechanical Engineering, University of Wisconsin-Madison, Madison, WI 53706, USA.

Förderung

  • the Office of Naval Research

Zitieren

APA

Terpsma, R., Carlsen, R. W., Szalkowski, R., Malave, S., Fawzi, A. L., Franck, C., & Hovey, C. (2023). Head Impact Modeling to Support a Rotational Combat Helmet Drop Test. Military Medicine. https://doi.org/10.1093/milmed/usab374

Vancouver

Terpsma R, Carlsen RW, Szalkowski R, Malave S, Fawzi AL, Franck C, et al. Head Impact Modeling to Support a Rotational Combat Helmet Drop Test. Military Medicine. 2023. doi:10.1093/milmed/usab374

BibTeX
@article{Terpsma2023,
  author = {Terpsma, Ryan and Carlsen, Rika Wright and Szalkowski, Ron and Malave, Sushant and Fawzi, Alice Lux and Franck, Christian and Hovey, Chad},
  title = {Head Impact Modeling to Support a Rotational Combat Helmet Drop Test},
  journal = {Military Medicine},
  year = {2023},
  doi = {10.1093/milmed/usab374}
}
Kostenlos starten →