EUVIMEDEUVIMED entdecken
Crossref

The Influence of Headform Pose on the Blunt Impact Performance of American Football Helmets

Mark Jesunathadas, Elizabeth D Edwards, Tiffany L Landry, Scott G Piland, Trenton E Gould, Thomas A Plaisted iD

Journal of Biomechanical Engineering · 2025

DOI: 10.1115/1.4068632 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, 2025. Verfasst von Mark Jesunathadas und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Kinesiology and Nutrition, The University of Southern Mississippi, Hattiesburg, MS 39406. Hauptthemen laut MEDLINE: Head Protective Devices, Football, Head, Mechanical Phenomena. Die Arbeit nennt 12 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The purpose of this research was to evaluate the influence of anthropomorphic test device (ATD) head–neck system pose on the kinematic responses of an ATD donning football helmets during blunt impact tests. Specifically, for two American football helmets, we aimed to determine if identical impact locations but with two different ATD head–neck poses resulted in differences in ATD headform kinematics. Eight Xenith Shadow and eight X2E+ American football helmets were fit to a medium National Operating Committee of Standards for Athletic Equipment (NOCSAE) ATD attached to a male 50th percentile Hybrid III neck. Each helmet was impacted at 6 m/s using a pneumatic linear ram four times at four sites on the helmet. One set (four) of the Shadow and (four) X2E+ helmets were impacted with the ATD head–neck mount system rotated in a manner that sometimes resulted in a flexed looking pose (flexed pose). The other set (four Shadow and four X2E+) were impacted with the ATD head–neck mount system rotated in a manner that sometimes resulted in a lateral bending type pose (lateral bending pose). Dependent measures included the difference (d) between the two poses (flexion–lateral bending) in peak linear acceleration (dPLA), peak angular acceleration (dPAA), and peak angular velocity (dPAV). A significant interaction between helmet and location was observed for dPLA (p < 0.001), dPAA (p < 0.001), and dPAV (p < 0.001). A main effect for helmet was also observed for dPLA (p < 0.001), dPAA (p = 0.025), and dPAV (p < 0.008). The effect of such results within the context of methodologies that rank helmets according to blunt impact performance is discussed.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Head Protective DevicesFootballHeadMechanical PhenomenaPostureBiomechanical PhenomenaMaleHumansSports EquipmentEquipment DesignAccelerationMaterials Testing

Autor:innen und Institutionen

  • School of Kinesiology and Nutrition, The University of Southern Mississippi, Hattiesburg, MS 39406.
  • University of Southern Mississippi.
  • CCDC Army Research Laboratory, Weapons and Materials Research Directorate, Aberdeen Proving Ground, MD 21005.

ORCID-Profile: Thomas A Plaisted

Zitieren

APA

Jesunathadas, M., Edwards, E. D., Landry, T. L., Piland, S. G., Gould, T. E., & Plaisted, T. A. (2025). The Influence of Headform Pose on the Blunt Impact Performance of American Football Helmets. Journal of Biomechanical Engineering. https://doi.org/10.1115/1.4068632

Vancouver

Jesunathadas M, Edwards ED, Landry TL, Piland SG, Gould TE, Plaisted TA. The Influence of Headform Pose on the Blunt Impact Performance of American Football Helmets. Journal of Biomechanical Engineering. 2025. doi:10.1115/1.4068632

BibTeX
@article{Jesunathadas2025,
  author = {Jesunathadas, Mark and Edwards, Elizabeth D and Landry, Tiffany L and Piland, Scott G and Gould, Trenton E and Plaisted, Thomas A},
  title = {The Influence of Headform Pose on the Blunt Impact Performance of American Football Helmets},
  journal = {Journal of Biomechanical Engineering},
  year = {2025},
  doi = {10.1115/1.4068632}
}
Kostenlos starten →